I think I may not, it would probably be a large waste of time. On Thursday, June 27, 2019 at 6:57:10 AM UTC+1, Timothy March wrote: > > You may want to look at post from RPI gipo help and try LinuxCnc with > hal_gipo.so by KL Chin > > “Quote > Hi , > > I still testing both. > > 1) LinuxCNC had already 2.8 but MachineKit still based on 2.6. > 2) The StepConf was so slow with MachineKit. > 3) The Gui sample works on LinuxCNC > > BTW. I had attached the hal_gpio.so for LinuxCNC, may be you can try it. > Just copy to LinuxCNC rtlib folder. I just change few lines of the > hal_gpio.c. > > Regards, > KL Chin > > On Tuesday, 28 August 2018 03:42:31 UTC+8, Timothy March wrote: > KL Chin why are you using LinuxCnc instead of Machinekit? The hal_gipo > only works with Machinekit there is no gipo driver for LinuxCnc. > Tim > > Attachments (1) > > hal_gpio.so > 26 KB Download” >
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/43ca25a2-a396-434b-af09-8b10cdb02343%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
