I had to make some changes to the pin routing of my board for the encoders. I assume the quartus config changes haven't been applied to the docker environment yet?
@ Michael, if not can you build firmware with this .vhd file? On Friday, August 30, 2019 at 12:12:02 AM UTC-4, justin White wrote: > > I haven't gotten to an Open source derivative just yet. > > When I do it'll be in Kicad that's what I use. > > > On Thursday, August 29, 2019 at 6:57:15 PM UTC-4, Michael Brown wrote: > > Perhaps even kicad compatible... > > On Friday, 30 August 2019 00:56:03 UTC+2, Michael Brown wrote: > > A board schematic (with pins connectors wires components etc...) ? > preferably open source... > > > On Thursday, 29 August 2019 23:42:04 UTC+2, justin White wrote: > > What are you looking for? > > > On Thursday, August 29, 2019 at 1:00:54 PM UTC-4, Michael Brown wrote: > > @Justin > Do you have a schematic available for your board ? > > On Wednesday, 28 August 2019 20:53:41 UTC+2, Michael Brown wrote: > > Yes > It would certainly help my debug efforts here to have the physical > board(s) on hand. :-) > > I can PM you my street address when you have it build t and ready... > > On Wednesday, 28 August 2019 03:54:49 UTC+2, justin White wrote: > > After looking at it I wonder if it is not just the 8i20 portion of SSerial > code has issues. I'm sort of at a loss as I'm not really sure what I'm > seeing. Like I said, if you want I can whip you up a board and send it to > you on the next run if you want > > ... -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/68b57455-6662-458b-a511-e3dddbe7371c%40googlegroups.com.
PIN_st_fpga_soc_dc1G_ss.vhd
Description: Binary data
