Hi, Every time in the past that I've checked the MD5, is came out fine. I didn't check this time, so I don't know if that was the problem. It is quite possible I messed around with some variable or parameter that I'm not aware of, and that got corrected by doing a new download (although I'm pretty sure I followed the same procedure as before). In any case I got it to work.
Jeff On Thursday, December 19, 2019 at 5:30:52 AM UTC-8, fishy wrote: > > MD5? > > On Tuesday, 17 December 2019 23:06:22 UTC, Jeff Pollard wrote: >> >> Hi, >> >> An update: I downloaded the image file again, and it now works. >> I'm not sure what was going on... >> >> Jeff >> >> On Saturday, December 14, 2019 at 7:30:49 PM UTC-8, Jeff Pollard wrote: >>> >>> Hi, >>> >>> I am using a recent machinekit image: >>> >>> bone-debian-9.11-machinekit-armhf-2019-12-02-4gb.img.xz >>> >>> I have it running on my PocketBeagle, but I can't seem to communicate >>> with the I/O through hal. I've done: >>> >>> config-pin -f Sample.bbio *(a listing of this file is below)* >>> realtime start >>> halcmd loadrt hal_bb_gpio board=PocketBeagle output_pins=202,204,206,208 >>> input_pins=227,229,231,233,128 >>> halcmd loadusr halmeter >>> >>> From here, halmeter runs and will list all of the I/O expected, but if I >>> select an input (i.e. bb_gpio.p2.in-33) and watch for change, the display >>> will not change when I change the state of the pin. >>> >>> If I query the state of the same pin using: >>> >>> config-pin -q 2.33 >>> >>> I can read the proper state of the pin. >>> >>> My uEnv.txt has not been modified. It has: >>> uname_r=4.19.72-bone-rt-r40 >>> enable_uboot_overlays=1 >>> uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo >>> enable_uboot_cape_universal=1 >>> cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet >>> >>> Am I missing a configuration step somewhere? >>> >>> Thanks, >>> >>> Jeff >>> ============================= >>> Sample.bbio >>> --------------------- >>> overlay cape-universal >>> overlay cape-bone-iio >>> P2.02 out # out 1 >>> P2.04 out # out 2 >>> P2.06 out # out 3 >>> P2.08 out # ou1 4 >>> >>> P2.27 in # in 1 >>> P2.29 in # in 2 >>> P2.31 in # in 3 >>> P2.33 in # in 4 >>> P1.28 in # in 5 >>> >>> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/8b0574be-36a6-4229-bb7a-f583e76fefbf%40googlegroups.com.
