Hi there, I'm super-new to the BBB World I've struggled a lot since you need to first get the thing working :) and the primar access through USB-Network is with the drivers of BBB not working driver-sign issues etc..
so now i found that wonderful post here: https://machinekoder.com/machinekit-debian-stretch-beaglebone-black/ but unfortunately i cant get it setup correctly there is no picture over the QT machinekit-client. i tried also the access to the desktop but its unfortunately empty as well. i would highly appreciate if someone could make an entire step by step tutorial. until the point where the GPIOS are set to STEP / DIR as well as the timings. i would like to use the BBB to run a 3-axis mill that was run with GRBL before. cheers -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/3ca3b071-5e4e-4a4c-b20b-c678b9044f1d%40googlegroups.com.
