i found this ready to go image here: https://www.necitec.de/index.php/en/downloads
it is what i was looking for! good performance. i'd still like the attempt to use the QT machinekit client, maybe there is one who can make a step by step tutorial for that... cheers On Monday, December 23, 2019 at 9:45:23 AM UTC+1, Jo sias wrote: > > Hi there, I'm super-new to the BBB World > > I've struggled a lot since you need to first get the thing working :) and > the primar access through USB-Network is with the drivers of BBB not > working driver-sign issues etc.. > > so now i found that wonderful post here: > https://machinekoder.com/machinekit-debian-stretch-beaglebone-black/ > > but unfortunately i cant get it setup correctly there is no picture over > the QT machinekit-client. > > i tried also the access to the desktop but its unfortunately empty as well. > > i would highly appreciate if someone could make an entire step by step > tutorial. until the point where the GPIOS are set to STEP / DIR as well as > the timings. > > i would like to use the BBB to run a 3-axis mill that was run with GRBL > before. > > cheers > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/e9c6a171-cb22-40be-ab83-294a54cfda2a%40googlegroups.com.
