im fairly new to BBB and machinekit and im having a problem with getting my Beagle Bone wireless to boot properly.
I can use a number of other images to get ghe card to boot but when i start the machinekit image it only allows me to type in a login and password then goes to a black screen with a mouse pointer on it. Alternatively i have tried to connect to it via usb but it does not show up as a network devise or usb device. Also i see the wifi of the board and try to log on and go to the ip address that has worked in other versions with no luck 192.168.7.2 192.168.6.2 192.168.8.1 And a few others If there is something that i am missing please give me a hand. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/ea444798-e672-4d3f-8b83-794d9288b1bf%40googlegroups.com.
