Hi, the latest Machinekit-HAL should run on arm64 architecture - there is even testing of this: https://travis-ci.com/github/machinekit/machinekit-hal/jobs/371433497 (example of the latest push). I am not completely sure about the commit e81023b8b9ae49a9e971d9da6d424297061772bc, what kind of issue are you experiencing?
Cern. Aug 13, 2020, 10:14 by [email protected]: > Hi，Michael > I followed your advice to use the commit id > e81023b8b9ae49a9e971d9da6d424297061772bc and use the > ./script/build_with_cnc > but I forgotted that I was running on a ARM64 board，there are many > problems occured。 > Is there a available version on arm64 architecture ？ > 在2020年8月11日星期二 UTC+8 下午10:16:15<[email protected]> 写道： > >> Yes, the Machinekit-CNC@master cannot be currently built on top of >> Machinekit-HAL@master. This was done because the original build flow was >> extremely inflexible and the precedence was given to option to build >> Enhanced Machine Controller (which is developed as part of LinuxCNC and the >> development is much more active than Machinekit's own CNC portions). This is >> now possible - >> https://github.com/machinekit/emcapplication>> and can be >> previewed by following instructions here: >> >> https://github.com/machinekit/EMCApplication/issues/1#issue-666660311>> . >> >> I am hoping that Machinekit-CNC will be again buildable on Machinekit-HAL >> after CMake build system switch, which should filter out problems stemming >> out from kernel-space module past and streamline the whole operation. >> >> Cern. >> >> >> Aug 11, 2020, 11:23 by >> [email protected] <>>> : >> >> > I also encountered the same problem 。I‘ll try this check out later。 >> > You just solved this problem by check out commit id？ >> > >> > 在 2020年6月21日星期日 UTC+8上午1:14:17，Michael Labuda写道： >> > >> >> Hello, >> >> >> >> I am setting up a development environment and trying to build machine-kit >> >> from source, I was able to build machinekit-hal without any problems, but >> >> machinekit-cnc is a different story. Following instructions given on >> >> >> >> https://www.machinekit.io/>> >> docs/developing/machinekit->> >> >> developing/#get-source-and->> build>> I encountered problems immediately >> >> as there is no build_with_cnc script included in the machinekit git. I >> >> found this script in someone else's repo and copied it over. It started >> >> to compile but then failed after it couldn't find >> >> /machinekit-cnc/src/libnml/>> nml/inifile.XX. These appear to be symlinks >> >> to some fakeinclude directory. I put in some dummy empty inifile.XX files >> >> which got me a bit further but other source files are actually attempting >> >> to use an Inifile class that doesn't exist. What's going on here? Did I >> >> clone the wrong repo or something? >> >> >> >> Thanks, >> >> Michael >> >> >> > >> > >> > >> > -- >> > website: > >> http://www.machinekit.io>> > blog: > >> >> > http://blog.machinekit.io>> > github: > >> >> > https://github.com/machinekit>> >> > --- >> > You received this message because you are subscribed to the Google Groups >> > "Machinekit" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> > email to > >> [email protected] <>>> > . >> > To view this discussion on the web visit > >> >> > https://groups.google.com/d/msgid/machinekit/2846e9a6-95ea-486f-abcf-44e958b00798o%40googlegroups.com>> >> > <>> >> > https://groups.google.com/d/msgid/machinekit/2846e9a6-95ea-486f-abcf-44e958b00798o%40googlegroups.com?utm_medium=email&utm_source=footer>> >> > >> . >> > >> >> > > > > -- > website: > http://www.machinekit.io> blog: > http://blog.machinekit.io> > github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to > [email protected]> . > To view this discussion on the web visit > > https://groups.google.com/d/msgid/machinekit/a74db377-e255-49ac-9545-29180951fa14n%40googlegroups.com > > <https://groups.google.com/d/msgid/machinekit/a74db377-e255-49ac-9545-29180951fa14n%40googlegroups.com?utm_medium=email&utm_source=footer>> > . > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/MEbj8ZJ--3-2%40tuta.io.
