>When I attached ethernet cable to the BNC, I >immediately got a yellow conflict on the hub which shut down the LAN. If >I unhook the tee connector from this "new" computer, I get a good hub >back. I tried three extra cards but all gave yellow/orange problem.
Is there more than a BNC connector? Do you have to select (maybe via jumper or switch) which port to use? >Yesterday I had experienced this same type problem on another "new" >computer and had solved it by installing OS8.1. When I rebooted after >that install, I got Ethernet offered in AppleTalk and was able to easily >connect to LAN and Internet. Sooo, I initialized this HD and installed >OS8.1. I rebooted fully expecting my problem to be gone. Still only >Printer Port or Modem Port in AppleTalk control panel window. Could be the card is bad... or more likely, you are using a card not supported by Apple's Ethernet Drivers. Who makes the card? Do you need their driver software? -chris <http://www.mythtech.net> -- MacNetwork is sponsored by <http://lowendmac.com/> and... XRouter Pro | Share your DSL or cable modem between multiple computers! Dr. Bott | Only $199 <http://www.drbott.com/prod/MIH130.html> Now shipping! Farallon Wireless SkyLINE PCI Card for Mac Desktops! <http://www.farallon.com/le/skyline/pci/index.html> Support Low End Mac <http://lowendmac.com/lists/support.html> MacNetwork list info: <http://lowendmac.com/lists/macnet.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/macnetwork%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
