If I were using the command prompt in Linux, I would look in the /etc.
directory at the fstab file and when I looked there, I found this info.
/dev/hd0a / ufs rw 1 1.
/dev/hd0e /var ufs rw 1 2.
/dev/hd0f /usr ufs rw 1 2.
/dev/hd0d /tmp mfs rw,-s=12000,-b=8192,-f=1024,-T=sd660 0 0.
However, I am not sure this is the right place as there are five fstab
files, three of which are candidates. You might change something using
NetInfo and look inside the fstab.hd file for a change.
Hope this helps some.
Bob
David Campion wrote:
>Hi all
>
>I have a machine that has three hard drives in and I would like to change
>the mount point of them.
>
>Now I can do it by unmounting the disk and remounting manually but when the
>machine reboots the drive reverts back to the original mount point.
>
>Anybody got any ideas as to where the automount info is stored??
>
>Thanks
>
>Dave.
>
--
It has been said before but warrants repeating, "If you think education is expensive,
try ignorance."
Bob Sharp
On Line Technology Support Specialist
The Learning Space: Right In Class Project
A Learning Space (U.S. West/NEA) Grant Cadre Member
http://www.learningspace.org/about_ls/vitae/sharp/rsharp.html
Newly elected: Middle School Representative to the NCCE Board
