Try the pre-built 2.2.9 version: http://sourceforge.net/projects/gnucash/
I struggled a lot with trying to build it but ultimately found it much
less painful to take advantage of someone else's sweat and tears.
Dr. Kurt Hillig
UMNet Administration I always tell the Fax (734)763-4050
University of Michigan absolute truth, Phone (734)647-8778
Ann Arbor, MI 48105-3640 as I see it. EMail khillig(at)umich.edu
> Computers were invented to help people waste more time faster <
On Mon, 17 May 2010, Glenn Hoffman wrote:
I have been struggling thru installing the Quartz variant of GnuCash into Mac
OS X 10.5.8 following the instructions at
http://wiki.gnucash.org/wiki/MacOSX/MacPortsDetail#Using_MacPorts_to_install_the_native_Quartz_version_of_GnuCash
I am now stuck after my latest attempt, which produced the following report.
Where do I go from here?
Pika:~ glenn$ sudo port install gnucash
---> Computing dependencies for gnucash
---> Extracting tiff
---> Applying patches to tiff
---> Configuring tiff
---> Building tiff
---> Staging tiff into destroot
---> Installing tiff @3.9.2_3+macosx
---> Activating tiff @3.9.2_3+macosx
---> Cleaning tiff
---> Fetching gtk2
---> Attempting to fetch gtk+-2.18.8.tar.bz2 from
ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/gtk+/2.18/
---> Verifying checksum(s) for gtk2
---> Extracting gtk2
---> Applying patches to gtk2
---> Configuring gtk2
---> Building gtk2
---> Staging gtk2 into destroot
---> Installing gtk2 @2.18.8_0+no_x11+quartz
---> Activating gtk2 @2.18.8_0+no_x11+quartz
---> Cleaning gtk2
---> Fetching libglade2
---> Attempting to fetch libglade-2.6.4.tar.bz2 from
ftp://ftp.cse.buffalo.edu/pub/Gnome/sources/libglade/2.6/
---> Verifying checksum(s) for libglade2
---> Extracting libglade2
---> Configuring libglade2
---> Building libglade2
---> Staging libglade2 into destroot
---> Installing libglade2 @2.6.4_1
---> Activating libglade2 @2.6.4_1
---> Cleaning libglade2
---> Fetching opensp
---> Attempting to fetch OpenSP-1.5.2.tar.gz from
http://voxel.dl.sourceforge.net/openjade
---> Verifying checksum(s) for opensp
---> Extracting opensp
---> Configuring opensp
---> Building opensp
---> Staging opensp into destroot
---> Installing opensp @1.5.2_0
---> Activating opensp @1.5.2_0
---> Cleaning opensp
---> Fetching libofx
---> Attempting to fetch libofx-0.9.1.tar.gz from
http://voxel.dl.sourceforge.net/libofx
---> Verifying checksum(s) for libofx
---> Extracting libofx
---> Configuring libofx
---> Building libofx
---> Staging libofx into destroot
---> Installing libofx @0.9.1_0
---> Activating libofx @0.9.1_0
---> Cleaning libofx
---> Fetching glut
---> Verifying checksum(s) for glut
---> Extracting glut
---> Configuring glut
---> Building glut
---> Staging glut into destroot
---> Installing glut @3.7_3
---> Activating glut @3.7_3
---> Cleaning glut
---> Fetching makedepend
---> Attempting to fetch makedepend-1.0.2.tar.bz2 from
http://www.x.org/pub/individual/util/
---> Verifying checksum(s) for makedepend
---> Extracting makedepend
---> Configuring makedepend
---> Building makedepend
---> Staging makedepend into destroot
---> Installing makedepend @1.0.2_0
---> Activating makedepend @1.0.2_0
---> Cleaning makedepend
---> Fetching xorg-dri2proto
---> Attempting to fetch dri2proto-2.3.tar.bz2 from
http://xorg.freedesktop.org/archive/individual/proto
---> Verifying checksum(s) for xorg-dri2proto
---> Extracting xorg-dri2proto
---> Configuring xorg-dri2proto
---> Building xorg-dri2proto
---> Staging xorg-dri2proto into destroot
---> Installing xorg-dri2proto @2.3_0
---> Activating xorg-dri2proto @2.3_0
---> Cleaning xorg-dri2proto
---> Fetching xorg-glproto
---> Attempting to fetch glproto-1.4.11.tar.bz2 from
http://xorg.freedesktop.org/archive/individual/proto/
---> Verifying checksum(s) for xorg-glproto
---> Extracting xorg-glproto
---> Configuring xorg-glproto
---> Building xorg-glproto
---> Staging xorg-glproto into destroot
---> Installing xorg-glproto @1.4.11_0
---> Activating xorg-glproto @1.4.11_0
---> Cleaning xorg-glproto
---> Fetching xorg-fixesproto
---> Attempting to fetch fixesproto-4.1.1.tar.bz2 from
http://xorg.freedesktop.org/archive/individual/proto/
---> Verifying checksum(s) for xorg-fixesproto
---> Extracting xorg-fixesproto
---> Configuring xorg-fixesproto
---> Building xorg-fixesproto
---> Staging xorg-fixesproto into destroot
---> Installing xorg-fixesproto @4.1.1_0
---> Activating xorg-fixesproto @4.1.1_0
---> Cleaning xorg-fixesproto
---> Fetching xorg-libXfixes
---> Attempting to fetch libXfixes-4.0.4.tar.bz2 from
http://xorg.freedesktop.org/archive/individual/lib/
---> Verifying checksum(s) for xorg-libXfixes
---> Extracting xorg-libXfixes
---> Configuring xorg-libXfixes
---> Building xorg-libXfixes
---> Staging xorg-libXfixes into destroot
---> Installing xorg-libXfixes @4.0.4_0
---> Activating xorg-libXfixes @4.0.4_0
---> Cleaning xorg-libXfixes
---> Fetching xorg-libXi
---> Attempting to fetch libXi-1.3.tar.bz2 from
http://xorg.freedesktop.org/archive/individual/lib/
---> Verifying checksum(s) for xorg-libXi
---> Extracting xorg-libXi
---> Configuring xorg-libXi
Error: Target org.macports.configure returned: configure failure: shell
command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXi/work/libXi-1.3"
&& ./configure --prefix=/opt/local " returned error 1
Command output: checking for objdir... .libs
checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
checking if /usr/bin/gcc-4.0 static flag -static works... no
checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc-4.0 linker
(/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries...
yes
checking dynamic linker characteristics... darwin9.8.0 dyld
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for /usr/bin/gcc-4.0 option to accept ISO C99... -std=gnu99
checking for pkg-config... /opt/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for XI... configure: error: Package requirements (xproto >= 7.0.13
x11 >= 1.2.99.1 xextproto >= 7.0.3 xext >= 1.0.99.1 inputproto >= 1.9.99.902)
were not met:
Requested 'x11 >= 1.2.99.1' but version of X11 is 1.2.2
Requested 'inputproto >= 1.9.99.902' but version of InputProto is 1.5.1
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables XI_CFLAGS
and XI_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
Error: The following dependencies failed to build: aqbanking qt3 mesa
xorg-libXi xorg-libXmu xorg-libXt xorg-libsm xorg-libice xorg-libXcursor
xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto gconf
dbus-glib dbus orbit2 libidl policykit goffice libart_lgpl libgsf gnome-vfs
desktop-file-utils gnome-mime-data libbonobo guile16 libgnomeprintui
gnome-icon-theme hicolor-icon-theme icon-naming-utils p5-xml-simple
p5-xml-namespacesupport p5-xml-sax libgnomecanvas libgnomeprint bison
libgnomecups libgnomeui gnome-keyring libbonoboui libgnome esound audiofile
libgtkhtml3 enchant aspell texinfo lzmautils hunspell libsoup libproxy cmake
libidn p5-finance-quote p5-crypt-ssleay p5-datemanip p5-html-tableextract
p5-html-tree p5-html-parser p5-html-tagset p5-libwww-perl
p5-compress-raw-zlib p5-io-compress p5-compress-raw-bzip2 p5-uri slib
slib-guile16
Error: Status 1 encountered during processing.
Before reporting a bug, first run the command again with the -d flag to get
complete output.
========= Other Information ============
Pika:~ glenn$ port installed
The following ports are currently installed:
atk @1.30.0_0 (active)
autoconf @2.64_0
autoconf @2.65_1 (active)
automake @1.11_0
automake @1.11.1_0 (active)
bzip2 @1.0.5_2 (active)
cairo @1.8.10_0+macosx+no_x11+quartz (active)
curl @7.19.5_0 (active)
db46 @4.6.21_5 (active)
docbook-xml @5.0_0 (active)
docbook-xml-4.1.2 @4.1.2_1 (active)
docbook-xml-4.2 @4.2_0 (active)
docbook-xml-4.3 @4.3_0 (active)
docbook-xml-4.4 @4.4_0 (active)
docbook-xml-4.5 @4.5_0 (active)
docbook-xml-5.0 @5.0_0 (active)
docbook-xsl @1.75.2_0 (active)
expat @2.0.1_0 (active)
fontconfig @2.7.1_0+macosx (active)
freetype @2.3.9_0+macosx (active)
gdbm @1.8.3_1 (active)
getopt @1.1.4_1 (active)
gettext @0.17_4
gettext @0.18_0 (active)
git-core @1.6.3.1_0+doc (active)
glib2 @2.24.1_0+darwin (active)
glut @3.7_3 (active)
gmp @5.0.1_0 (active)
gnome-common @2.26.0_0 (active)
gnome-doc-utils @0.18.1_1 (active)
gnutls @2.8.6_0 (active)
gperf @3.0.4_0 (active)
gtk-doc @1.14_0 (active)
gtk2 @2.18.8_0+no_x11+quartz (active)
gwenhywfar @3.11.3_0 (active)
help2man @1.36.4_1
help2man @1.37.1_1 (active)
intltool @0.40.6_0 (active)
iso-codes @3.16_0 (active)
jasper @1.900.1_7 (active)
jpeg @8a_0 (active)
ktoblzcheck @1.26_0 (active)
libgcrypt @1.4.5_0 (active)
libglade2 @2.6.4_1 (active)
libgpg-error @1.7_0 (active)
libiconv @1.12_2
libiconv @1.13.1_0 (active)
libofx @0.9.1_0 (active)
libpixman @0.18.2_0 (active)
libpng @1.2.43_0 (active)
libtasn1 @2.2_0 (active)
libtool @2.2.6a_0
libtool @2.2.6b_1+darwin (active)
libxml2 @2.7.7_0 (active)
libxslt @1.1.26_0 (active)
lzo @1.08_0 (active)
m4 @1.4.13_0
m4 @1.4.14_0 (active)
makedepend @1.0.2_0 (active)
ncurses @5.7_0 (active)
ncursesw @5.7_0 (active)
opencdk @0.6.6_0 (active)
opensp @1.5.2_0 (active)
openssl @0.9.8k_0 (active)
p5-error @0.17015_0 (active)
p5-getopt-long @2.38_0 (active)
p5-locale-gettext @1.05_0
p5-locale-gettext @1.05_2 (active)
p5-pathtools @3.31_0 (active)
p5-scalar-list-utils @1.23_0 (active)
p5-xml-parser @2.36_0 (active)
pango @1.24.5_0+macosx+no_x11+quartz (active)
perl5 @5.8.9_0 (active)
perl5.8 @5.8.9_3 (active)
pkgconfig @0.23_1 (active)
popt @1.15_0 (active)
py25-clientform @0.2.9_0 (active)
py25-mechanize @0.1.9_0 (active)
py25-openssl @0.7_0 (active)
py25-setuptools @0.6c9_0 (active)
py26-clientform @0.2.9_0
py26-libxml2 @2.6.21_0 (active)
py26-mechanize @0.1.9_0
python25 @2.5.4_6+darwin_9+macosx (active)
python26 @2.6.2_3
python26 @2.6.5_0+darwin (active)
python_select @0.2.1_0+darwin_9
python_select @0.3_0+darwin_9 (active)
rarian @0.8.1_0 (active)
readline @6.0.000_1 (active)
rsync @3.0.6_0 (active)
shared-mime-info @0.71_0 (active)
sqlite3 @3.6.17_0 (active)
tcl @8.5.6_0 (active)
tiff @3.9.2_3+macosx (active)
tk @8.5.6_1 (active)
Xft2 @2.1.13_2 (active)
xmlcatmgr @2.2_1 (active)
xorg-bigreqsproto @1.0.2_0 (active)
xorg-dri2proto @2.3_0 (active)
xorg-fixesproto @4.1.1_0 (active)
xorg-glproto @1.4.11_0 (active)
xorg-inputproto @1.5.1_0 (active)
xorg-kbproto @1.0.3_0 (active)
xorg-libX11 @1.2.2_0 (active)
xorg-libXau @1.0.4_1 (active)
xorg-libXdmcp @1.0.2_1 (active)
xorg-libXext @1.0.99.4_1 (active)
xorg-libXfixes @4.0.4_0 (active)
xorg-libXScrnSaver @1.1.3_1 (active)
xorg-renderproto @0.11_0 (active)
xorg-scrnsaverproto @1.1.0_0 (active)
xorg-util-macros @1.2.2_0 (active)
xorg-xcmiscproto @1.1.2_0 (active)
xorg-xextproto @7.1.0_0 (active)
xorg-xf86bigfontproto @1.1.2_0 (active)
xorg-xproto @7.0.15_0 (active)
xorg-xtrans @1.2.4_0 (active)
xrender @0.9.4_6 (active)
zlib @1.2.3_2 (active)
Thanks you for any help.
Glenn
_______________________________________________
macports-users mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
!DSPAM:4bf178e579591385515324!
_______________________________________________
macports-users mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
