On 5 December 2010 19:00, Gabriele Kahlout <[email protected]> wrote:
> sudo port -d install gcc45 > DEBUG: Changing to port directory: /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/lang/gcc45 > DEBUG: OS darwin/10.5.0 (Mac OS X 10.6) arch i386 > DEBUG: org.macports.load registered provides 'load', a pre-existing > procedure. Target override will not be provided > DEBUG: org.macports.unload registered provides 'unload', a pre-existing > procedure. Target override will not be provided > DEBUG: org.macports.distfiles registered provides 'distfiles', a > pre-existing procedure. Target override will not be provided > DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf > DEBUG: universal variant already exists, so not adding the default one > Portfile changed since last build; discarding previous state. > DEBUG: delete: > /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work > DEBUG: Starting logging for gcc45 > DEBUG: epoch: in tree: 0 installed: 0 > DEBUG: gmp 5.0.1_0 exists in the ports tree > DEBUG: gmp 5.0.1_0 is the latest installed > DEBUG: gmp 5.0.1_0 is active > DEBUG: Merging existing variants '' into variants > DEBUG: new fully merged portvariants: > DEBUG: Changing to port directory: /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/devel/gmp > DEBUG: OS darwin/10.5.0 (Mac OS X 10.6) arch i386 > DEBUG: org.macports.load registered provides 'load', a pre-existing > procedure. Target override will not be provided > DEBUG: org.macports.unload registered provides 'unload', a pre-existing > procedure. Target override will not be provided > DEBUG: org.macports.distfiles registered provides 'distfiles', a > pre-existing procedure. Target override will not be provided > DEBUG: Using group file /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl > DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf > DEBUG: universal variant already exists, so not adding the default one > DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0 > DEBUG: epoch: in tree: 0 installed: 0 > DEBUG: mpfr 3.0.0-p8_0 exists in the ports tree > DEBUG: mpfr 2.4.2-p1_0 is the latest installed > DEBUG: mpfr 2.4.2-p1_0 is active > DEBUG: Merging existing variants '' into variants > DEBUG: new fully merged portvariants: > DEBUG: Changing to port directory: /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/devel/mpfr > DEBUG: OS darwin/10.5.0 (Mac OS X 10.6) arch i386 > DEBUG: org.macports.load registered provides 'load', a pre-existing > procedure. Target override will not be provided > DEBUG: org.macports.unload registered provides 'unload', a pre-existing > procedure. Target override will not be provided > DEBUG: org.macports.distfiles registered provides 'distfiles', a > pre-existing procedure. Target override will not be provided > DEBUG: Using group file /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl > DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf > DEBUG: universal variant already exists, so not adding the default one > DEBUG: Starting logging for mpfr > ---> Computing dependencies for mpfr > DEBUG: Searching for dependency: gmp > DEBUG: Found Dependency: receipt exists for gmp > DEBUG: Executing org.macports.main (mpfr) > DEBUG: Skipping completed org.macports.fetch (mpfr) > DEBUG: Skipping completed org.macports.checksum (mpfr) > DEBUG: setting option extract.cmd to /usr/bin/bzip2 > DEBUG: Skipping completed org.macports.extract (mpfr) > DEBUG: Skipping completed org.macports.patch (mpfr) > ---> Configuring mpfr > DEBUG: Using compiler 'Mac OS X gcc 4.2' > DEBUG: configure phase started at Sun Dec 5 18:59:31 EST 2010 > DEBUG: Executing org.macports.configure (mpfr) > DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch x86_64' > CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' > LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' > CXX='/usr/bin/g++-4.2' > CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/.CC_PRINT_OPTIONS' > F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' > OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' > OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC_PRINT_OPTIONS='YES' > CC='/usr/bin/gcc-4.2' > DEBUG: Assembled command: 'cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/mpfr-3.0.0" > && ./configure --prefix=/opt/local' > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for a thread-safe mkdir -p... ./install-sh -c -d > checking for gawk... no > checking for mawk... no > checking for nawk... no > checking for awk... awk > checking whether make sets $(MAKE)... yes > checking whether to disable maintainer-specific portions of Makefiles... > yes > checking build system type... x86_64-apple-darwin10.5.0 > checking host system type... x86_64-apple-darwin10.5.0 > checking for grep that handles long lines and -e... /usr/bin/grep > checking for egrep... /usr/bin/grep -E > checking for a sed that does not truncate output... /usr/bin/sed > checking for gcc... /usr/bin/gcc-4.2 > checking whether the C compiler works... yes > checking for C compiler default output file name... a.out > checking for suffix of executables... > checking whether we are cross compiling... configure: error: in > `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/mpfr-3.0.0': > configure: error: cannot run C compiled programs. > If you meant to cross compile, use `--host'. > See `config.log' for more details. > shell command " cd > "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/mpfr-3.0.0" > && ./configure --prefix=/opt/local " returned error 1 > Error: Target org.macports.configure returned: configure failure: shell > command failed (see log for details) > DEBUG: Backtrace: configure failure: shell command failed (see log for > details) > while executing > "$procedure $targetname" > Warning: the following items did not execute (for mpfr): > org.macports.destroot org.macports.configure org.macports.build > Log for mpfr is at: > /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/main.log > *DEBUG: couldn't open > "/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex": > no such file or directory > while executing > "open [file join $dir tclIndex]"* > Error: Unable to upgrade port: 1 > DEBUG: upgrade mpfr failed > while executing > "macports::_upgrade_mport_deps $mport $target" > (procedure "mportexec" line 26) > invoked from within > "mportexec $workername $target" > Error: Unable to execute port: upgrade mpfr failed > To report a bug, see <http://guide.macports.org/#project.tickets> > > > > On 5 December 2010 18:46, Gabriele Kahlout <[email protected]>wrote: > >> >> >> On 5 December 2010 18:39, Ryan Schmidt <[email protected]> wrote: >> >>> >>> On Dec 5, 2010, at 17:32, Gabriele Kahlout wrote: >>> >>> > shall i go with uninstall + install, or just intall this: >>> > >>> http://distfiles.macports.org/MacPorts/MacPorts-1.9.2-10.6-SnowLeopard.dmg >>> >>> I would start with just running the disk image installer over what you >>> already have, without uninstalling anything first. If that works, all your >>> ports you had installed will still be there. >>> >>> and it worked! will report if the command goes through! >> >> (port upgrade outdated) >> >>> If that fails, you can still try uninstalling everything. >>> >>> >> >> >> -- >> Regards, >> K. Gabriele >> >> --- unchanged since 20/9/10 --- >> P.S. If the subject contains "[LON]" or the addressee acknowledges the >> receipt within 48 hours then I don't resend the email. >> subject(this) ∈ L(LON*) ∨ ∃x. (x ∈ MyInbox ∧ Acknowledges(x, this) ∧ >> time(x) < Now + 48h) ⇒ ¬resend(I, this). >> >> If an email is sent by a sender that is not a trusted contact or the email >> does not contain a valid code then the email is not received. A valid code >> starts with a hyphen and ends with "X". >> ∀x. x ∈ MyInbox ⇒ from(x) ∈ MySafeSenderList ∨ (∃y. y ∈ subject(x) ∧ y ∈ >> L(-[a-z]+[0-9]X)). >> >> > > > -- > Regards, > K. Gabriele > > --- unchanged since 20/9/10 --- > P.S. If the subject contains "[LON]" or the addressee acknowledges the > receipt within 48 hours then I don't resend the email. > subject(this) ∈ L(LON*) ∨ ∃x. (x ∈ MyInbox ∧ Acknowledges(x, this) ∧ > time(x) < Now + 48h) ⇒ ¬resend(I, this). > > If an email is sent by a sender that is not a trusted contact or the email > does not contain a valid code then the email is not received. A valid code > starts with a hyphen and ends with "X". > ∀x. x ∈ MyInbox ⇒ from(x) ∈ MySafeSenderList ∨ (∃y. y ∈ subject(x) ∧ y ∈ > L(-[a-z]+[0-9]X)). > > -- Regards, K. Gabriele --- unchanged since 20/9/10 --- P.S. If the subject contains "[LON]" or the addressee acknowledges the receipt within 48 hours then I don't resend the email. subject(this) ∈ L(LON*) ∨ ∃x. (x ∈ MyInbox ∧ Acknowledges(x, this) ∧ time(x) < Now + 48h) ⇒ ¬resend(I, this). If an email is sent by a sender that is not a trusted contact or the email does not contain a valid code then the email is not received. A valid code starts with a hyphen and ends with "X". ∀x. x ∈ MyInbox ⇒ from(x) ∈ MySafeSenderList ∨ (∃y. y ∈ subject(x) ∧ y ∈ L(-[a-z]+[0-9]X)).
_______________________________________________ macports-users mailing list [email protected] http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
