I've uninstalled and installed and finally, in 3 hours gcc45 compiled. Now how do I install it? I.e. how do I make it such g++ -v returns 4.5 and not 4.2? Sounds simple but my removing of g++ alias in usr/bin and replacement with a g++ that links to g++-mp-4.5 tells me that g++ is not executable. What was I supposed to do?
On 5 December 2010 19:00, Gabriele Kahlout <[email protected]> wrote: > > > On 5 December 2010 19:00, Gabriele Kahlout <[email protected]>wrote: > >> sudo port -d install gcc45 >> DEBUG: Changing to port directory: /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/lang/gcc45 >> DEBUG: OS darwin/10.5.0 (Mac OS X 10.6) arch i386 >> DEBUG: org.macports.load registered provides 'load', a pre-existing >> procedure. Target override will not be provided >> DEBUG: org.macports.unload registered provides 'unload', a pre-existing >> procedure. Target override will not be provided >> DEBUG: org.macports.distfiles registered provides 'distfiles', a >> pre-existing procedure. Target override will not be provided >> DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf >> DEBUG: universal variant already exists, so not adding the default one >> Portfile changed since last build; discarding previous state. >> DEBUG: delete: >> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc45/work >> DEBUG: Starting logging for gcc45 >> DEBUG: epoch: in tree: 0 installed: 0 >> DEBUG: gmp 5.0.1_0 exists in the ports tree >> DEBUG: gmp 5.0.1_0 is the latest installed >> DEBUG: gmp 5.0.1_0 is active >> DEBUG: Merging existing variants '' into variants >> DEBUG: new fully merged portvariants: >> DEBUG: Changing to port directory: /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/devel/gmp >> DEBUG: OS darwin/10.5.0 (Mac OS X 10.6) arch i386 >> DEBUG: org.macports.load registered provides 'load', a pre-existing >> procedure. Target override will not be provided >> DEBUG: org.macports.unload registered provides 'unload', a pre-existing >> procedure. Target override will not be provided >> DEBUG: org.macports.distfiles registered provides 'distfiles', a >> pre-existing procedure. Target override will not be provided >> DEBUG: Using group file /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl >> DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf >> DEBUG: universal variant already exists, so not adding the default one >> DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0 >> DEBUG: epoch: in tree: 0 installed: 0 >> DEBUG: mpfr 3.0.0-p8_0 exists in the ports tree >> DEBUG: mpfr 2.4.2-p1_0 is the latest installed >> DEBUG: mpfr 2.4.2-p1_0 is active >> DEBUG: Merging existing variants '' into variants >> DEBUG: new fully merged portvariants: >> DEBUG: Changing to port directory: /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/devel/mpfr >> DEBUG: OS darwin/10.5.0 (Mac OS X 10.6) arch i386 >> DEBUG: org.macports.load registered provides 'load', a pre-existing >> procedure. Target override will not be provided >> DEBUG: org.macports.unload registered provides 'unload', a pre-existing >> procedure. Target override will not be provided >> DEBUG: org.macports.distfiles registered provides 'distfiles', a >> pre-existing procedure. Target override will not be provided >> DEBUG: Using group file /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl >> DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/ >> rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf >> DEBUG: universal variant already exists, so not adding the default one >> DEBUG: Starting logging for mpfr >> ---> Computing dependencies for mpfr >> DEBUG: Searching for dependency: gmp >> DEBUG: Found Dependency: receipt exists for gmp >> DEBUG: Executing org.macports.main (mpfr) >> DEBUG: Skipping completed org.macports.fetch (mpfr) >> DEBUG: Skipping completed org.macports.checksum (mpfr) >> DEBUG: setting option extract.cmd to /usr/bin/bzip2 >> DEBUG: Skipping completed org.macports.extract (mpfr) >> DEBUG: Skipping completed org.macports.patch (mpfr) >> ---> Configuring mpfr >> DEBUG: Using compiler 'Mac OS X gcc 4.2' >> DEBUG: configure phase started at Sun Dec 5 18:59:31 EST 2010 >> DEBUG: Executing org.macports.configure (mpfr) >> DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch x86_64' >> CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' >> LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' >> CXX='/usr/bin/g++-4.2' >> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/.CC_PRINT_OPTIONS' >> F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' >> OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' >> OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC_PRINT_OPTIONS='YES' >> CC='/usr/bin/gcc-4.2' >> DEBUG: Assembled command: 'cd >> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/mpfr-3.0.0" >> && ./configure --prefix=/opt/local' >> checking for a BSD-compatible install... /usr/bin/install -c >> checking whether build environment is sane... yes >> checking for a thread-safe mkdir -p... ./install-sh -c -d >> checking for gawk... no >> checking for mawk... no >> checking for nawk... no >> checking for awk... awk >> checking whether make sets $(MAKE)... yes >> checking whether to disable maintainer-specific portions of Makefiles... >> yes >> checking build system type... x86_64-apple-darwin10.5.0 >> checking host system type... x86_64-apple-darwin10.5.0 >> checking for grep that handles long lines and -e... /usr/bin/grep >> checking for egrep... /usr/bin/grep -E >> checking for a sed that does not truncate output... /usr/bin/sed >> checking for gcc... /usr/bin/gcc-4.2 >> checking whether the C compiler works... yes >> checking for C compiler default output file name... a.out >> checking for suffix of executables... >> checking whether we are cross compiling... configure: error: in >> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/mpfr-3.0.0': >> configure: error: cannot run C compiled programs. >> If you meant to cross compile, use `--host'. >> See `config.log' for more details. >> shell command " cd >> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/work/mpfr-3.0.0" >> && ./configure --prefix=/opt/local " returned error 1 >> Error: Target org.macports.configure returned: configure failure: shell >> command failed (see log for details) >> DEBUG: Backtrace: configure failure: shell command failed (see log for >> details) >> while executing >> "$procedure $targetname" >> Warning: the following items did not execute (for mpfr): >> org.macports.destroot org.macports.configure org.macports.build >> Log for mpfr is at: >> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mpfr/main.log >> *DEBUG: couldn't open >> "/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex": >> no such file or directory >> while executing >> "open [file join $dir tclIndex]"* >> Error: Unable to upgrade port: 1 >> DEBUG: upgrade mpfr failed >> while executing >> "macports::_upgrade_mport_deps $mport $target" >> (procedure "mportexec" line 26) >> invoked from within >> "mportexec $workername $target" >> Error: Unable to execute port: upgrade mpfr failed >> To report a bug, see <http://guide.macports.org/#project.tickets> >> >> >> >> On 5 December 2010 18:46, Gabriele Kahlout <[email protected]>wrote: >> >>> >>> >>> On 5 December 2010 18:39, Ryan Schmidt <[email protected]> wrote: >>> >>>> >>>> On Dec 5, 2010, at 17:32, Gabriele Kahlout wrote: >>>> >>>> > shall i go with uninstall + install, or just intall this: >>>> > >>>> http://distfiles.macports.org/MacPorts/MacPorts-1.9.2-10.6-SnowLeopard.dmg >>>> >>>> I would start with just running the disk image installer over what you >>>> already have, without uninstalling anything first. If that works, all your >>>> ports you had installed will still be there. >>>> >>>> and it worked! will report if the command goes through! >>> >>> (port upgrade outdated) >>> >>>> If that fails, you can still try uninstalling everything. >>>> >>>> >>> >>> >>> -- >>> Regards, >>> K. Gabriele >>> >>> --- unchanged since 20/9/10 --- >>> P.S. If the subject contains "[LON]" or the addressee acknowledges the >>> receipt within 48 hours then I don't resend the email. >>> subject(this) ∈ L(LON*) ∨ ∃x. (x ∈ MyInbox ∧ Acknowledges(x, this) ∧ >>> time(x) < Now + 48h) ⇒ ¬resend(I, this). >>> >>> If an email is sent by a sender that is not a trusted contact or the >>> email does not contain a valid code then the email is not received. A valid >>> code starts with a hyphen and ends with "X". >>> ∀x. x ∈ MyInbox ⇒ from(x) ∈ MySafeSenderList ∨ (∃y. y ∈ subject(x) ∧ y ∈ >>> L(-[a-z]+[0-9]X)). >>> >>> >> >> >> -- >> Regards, >> K. Gabriele >> >> --- unchanged since 20/9/10 --- >> P.S. If the subject contains "[LON]" or the addressee acknowledges the >> receipt within 48 hours then I don't resend the email. >> subject(this) ∈ L(LON*) ∨ ∃x. (x ∈ MyInbox ∧ Acknowledges(x, this) ∧ >> time(x) < Now + 48h) ⇒ ¬resend(I, this). >> >> If an email is sent by a sender that is not a trusted contact or the email >> does not contain a valid code then the email is not received. A valid code >> starts with a hyphen and ends with "X". >> ∀x. x ∈ MyInbox ⇒ from(x) ∈ MySafeSenderList ∨ (∃y. y ∈ subject(x) ∧ y ∈ >> L(-[a-z]+[0-9]X)). >> >> > > > -- > Regards, > K. Gabriele > > --- unchanged since 20/9/10 --- > P.S. If the subject contains "[LON]" or the addressee acknowledges the > receipt within 48 hours then I don't resend the email. > subject(this) ∈ L(LON*) ∨ ∃x. (x ∈ MyInbox ∧ Acknowledges(x, this) ∧ > time(x) < Now + 48h) ⇒ ¬resend(I, this). > > If an email is sent by a sender that is not a trusted contact or the email > does not contain a valid code then the email is not received. A valid code > starts with a hyphen and ends with "X". > ∀x. x ∈ MyInbox ⇒ from(x) ∈ MySafeSenderList ∨ (∃y. y ∈ subject(x) ∧ y ∈ > L(-[a-z]+[0-9]X)). > > -- Regards, K. Gabriele --- unchanged since 20/9/10 --- P.S. If the subject contains "[LON]" or the addressee acknowledges the receipt within 48 hours then I don't resend the email. subject(this) ∈ L(LON*) ∨ ∃x. (x ∈ MyInbox ∧ Acknowledges(x, this) ∧ time(x) < Now + 48h) ⇒ ¬resend(I, this). If an email is sent by a sender that is not a trusted contact or the email does not contain a valid code then the email is not received. A valid code starts with a hyphen and ends with "X". ∀x. x ∈ MyInbox ⇒ from(x) ∈ MySafeSenderList ∨ (∃y. y ∈ subject(x) ∧ y ∈ L(-[a-z]+[0-9]X)).
_______________________________________________ macports-users mailing list [email protected] http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
