Hy Rainer Müller, thank you for your answer! My problem is: The new scanner is a CanoScan LIDE 210. It’s listed as complete for 1.0-63. But it does not work with 1.0-24 from macport.
This is what I get: mbpneu:$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x0fd9 [Elgato], product=0x0011 [EyeTV Diversity]) at libusb:001:006-0fd9-0011-00-00 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. This looks fine, but mbpneu:$ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). And the script scanimage —verbose --device-name=$device_name --lamp-off-time=0 --disable-dynamic-lineart=yes --threshold=60 --mode=Lineart --resolution=300 -l 5 -t 5 -x 210 -y 280 --batch=out%d.pgn --batch-prompt --batch-start=10 dies with: scanimage: no SANE devices found This my problem :-( hweber [email protected] Am 01.03.2015 um 23:25 schrieb Rainer Müller <[email protected]>: On 2015-03-01 21:56, hweber wrote: > sane-backends on macports is on @1.0.24. > http://www.sane-project.org/sane-mfgs.html lists sane-genesys 1.0-63. 1.0-63 > does not work unter OSX 10.10? What is the reason that macports stays at > 1.0.24? My new scanner needs 1.0-63 ist there anywhere a solution? Don't get confused by these version numbers. As listed on top of the website, the current stable version of sane-backends is 1.0.24, which is also the version MacPorts provides. This version number 1.0-63 listed is for the genesys backend, which is distributed as part of sane-backends. Rainer _______________________________________________ macports-users mailing list [email protected] https://lists.macosforge.org/mailman/listinfo/macports-users
