On 5/7/07, Sven Anders <[EMAIL PROTECTED]> wrote:
KLessou schrieb:
> There is ONLY 1 cpu :-( :
>
> ls /sys/devices/system/cpu
> cpu0 sched_mc_power_savings
>
> Is it a probleme in my kernel configuration ?
What gives:
* cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
stepping : 6
cpu MHz : 2000.000
cache size : 4096 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm
constant_tsc up pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4015.87
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
* uname -a
Linux KLessou 2.6.21.1-mactel #1 SMP PREEMPT Fri May 4 20:23:27 CEST 2007
x86_64 Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz GenuineIntel
GNU/Linux
* dmesg
Linux version 2.6.21.1-mactel ([EMAIL PROTECTED]) (gcc version 4.1.1 (Gentoo
4.1.1-r3)) #1 SMP PREEMPT Fri May 4 20:23:27 CEST 2007
Command line: auto BOOT_IMAGE=gentoo-2.6.21 ro root=803 noapic irqpoll
acpi=force splash=verbose,theme:emergence video=vesa:ywrap,mtrr
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007e087000 (usable)
BIOS-e820: 000000007e087000 - 000000007e288000 (ACPI NVS)
BIOS-e820: 000000007e288000 - 000000007eebe000 (ACPI data)
BIOS-e820: 000000007eebe000 - 000000007eeef000 (ACPI NVS)
BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data)
BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 516231) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 APPLE )
ACPI: XSDT 7EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
ACPI: FACP 7EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
ACPI: DSDT 7EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309)
ACPI: FACS 7EEC0000, 0040
ACPI: HPET 7EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
ACPI: APIC 7EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
ACPI: MCFG 7EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
ACPI: ASF! 7EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
ACPI: SBST 7EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
ACPI: ECDT 7EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
ACPI: SSDT 7EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
ACPI: SSDT 7EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
ACPI: SSDT 7EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 516231) 1 entries of 256 used
No mptable found.
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 516231
On node 0 totalpages: 516134
DMA zone: 56 pages used for memmap
DMA zone: 1329 pages reserved
DMA zone: 2614 pages, LIFO batch:0
DMA32 zone: 7001 pages used for memmap
DMA32 zone: 505134 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33536 bytes of per cpu data
Built 1 zonelists. Total pages: 507748
Kernel command line: auto BOOT_IMAGE=gentoo-2.6.21 ro root=803 noapic
irqpoll acpi=force splash=verbose,theme:emergence video=vesa:ywrap,mtrr
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
time.c: Detected 1995.003 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2027440k/2064924k available (3105k kernel code, 36844k reserved,
1490k data, 224k init)
Calibrating delay using timer specific routine.. 4015.87 BogoMIPS
(lpj=8031745)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c00)
SMP motherboard not detected.
Using local APIC timer interrupts.
result 10390628
Detected 10.390 MHz APIC timer.
SMP disabled
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at f0000000 - ffffffff
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI-GART: No AMD northbridge found.
pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 1000-1fff
MEM window: 90200000-902fffff
PREFETCH window: 90500000-905fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 90100000-901fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 90000000-900fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
vesafb: framebuffer at 0x80000000, mapped to 0xffffc20010100000, using
3072k, total 16064k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: SSDT 7EEB8C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309)
ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
ACPI: Processor [CPU1] (supports 8 throttling states)
Time: hpet clocksource has been installed.
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
intel_rng: FWH not detected
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 16124K stolen memory.
agpgart: AGP aperture is 256M @ 0x80000000
intelfb: Framebuffer driver for Intel(R)
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
intelfb: Cannot reserve FB region.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:01:00.0 to 64
sky2 0000:01:00.0: v1.14 addr 0x90200000 irq 10 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:17:f2:f0:3f:02
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
input: Macintosh mouse button emulation as /class/input/input4
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) ->
IRQ 10
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20b0-0x20b7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x20b8-0x20bf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: MATSHITADVD-R UJ-857D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ata_piix 0000:00:1f.2: version 2.10ac1
ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
ata_piix 0000:00:1f.2: invalid MAP value 0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x00000000000120c8 ctl 0x00000000000120ee bmdma
0x00000000000120a0 irq 11
ata2: SATA max UDMA/133 cmd 0x00000000000120c0 ctl 0x00000000000120ea bmdma
0x00000000000120a8 irq 11
scsi0 : ata_piix
ATA: abnormal status 0x7F on port 0x00000000000120cf
ATA: abnormal status 0x7F on port 0x00000000000120cf
ata1.01: ATA-7: Hitachi HTS541616J9SA00, SB4AC7CP, max UDMA/133
ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: configured for UDMA/133
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0x00000000000120c7
scsi 0:0:1:0: Direct-Access ATA Hitachi HTS54161 SB4A PQ: 0 ANSI: 5
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:1:0: Attached scsi disk sda
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x90445400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
applesmc: Apple MacBook detected:
applesmc: - Model with accelerometer
applesmc: - Model without light sensors and backlight
applesmc: - Model with 12 temperature sensors
applesmc: received a shock interrupt
applesmc: accelerometer successfully initialized.
applesmc: device successfully initialized.
applesmc: 1 fans found.
input: applesmc as /class/input/input5
applesmc: driver successfully loaded.
coretemp: This driver uses undocumented features of Core CPU. Temperature
might be wrong!
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
[EMAIL PROTECTED]
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:1b.0 to 64
USB Universal Host Controller Interface driver v3.0
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.10 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413,
RF5413, RF2133)
wlan: 0.8.4.2 (svn r2249)
ath_pci: 0.9.4.5 (svn r2249)
hda_codec: STAC922x, Apple subsys_id=106b2200
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
ath_rate_sample: 1.2 (svn r2249)
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 12.10 phy 8.1 radio 12.0
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5418: mem=0x90100000, irq=11
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00002020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
appletouch Geyser 3 inited.
input: appletouch as /class/input/input6
usbcore: registered new interface driver appletouch
EXT3 FS on sda3, internal journal
input: Apple Computer Apple Internal Keyboard / Trackpad as
/class/input/input7
input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as
/class/input/input8
input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
input: HID 05ac:1000 as /class/input/input9
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /class/input/input10
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized i915 1.6.0 20060119 on minor 0
input: Apple MacIntel infrared remote control driver as /class/input/input11
usbcore: registered new interface driver appleir
drivers/usb/input/appleir.c: v1.2:USB Apple MacIntel IR Receiver driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K
appletouch: incomplete data package (first byte: 2, length: 4).
hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to
recover by ending request.
Regards
Sven
--
Sven Anders <[EMAIL PROTECTED]> () Ascii Ribbon Campaign
/\ Support plain text
e-mail
ANDURAS service solutions AG
Innstraße 71 - 94036 Passau - Germany
Web: www.anduras.de - Tel: +49 (0)851-4 90 50-0 - Fax: +49 (0)851-4 90
50-55
Rechtsform: Aktiengesellschaft - Sitz: Passau - Amtsgericht Passau HRB
6032
Mitglieder des Vorstands: Sven Anders, Marcus Junker
Vorsitzender des Aufsichtsrats: Dipl. Kfm. Thomas Träger
Thx in advance.
--
~~~~~
| klessou |
~~~~~
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Mactel-linux-users mailing list
Mactel-linux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mactel-linux-users
