KLessou wrote: > > > On 5/7/07, *Sven Anders* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > KLessou schrieb: > > There is ONLY 1 cpu :-( : > > > > ls /sys/devices/system/cpu > > cpu0 sched_mc_power_savings > > > > Is it a probleme in my kernel configuration ? > > What gives: > > * cat /proc/cpuinfo > > > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz > stepping : 6 > cpu MHz : 2000.000 > cache size : 4096 KB > physical id : 0 > siblings : 1 > core id : 0 > cpu cores : 1 > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall > nx lm constant_tsc up pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr > lahf_lm > bogomips : 4015.87 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > > * uname -a > > > Linux KLessou 2.6.21.1-mactel #1 SMP PREEMPT Fri May 4 20:23:27 CEST > 2007 x86_64 Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz > GenuineIntel GNU/Linux > > * dmesg > > > Linux version 2.6.21.1-mactel ([EMAIL PROTECTED]) (gcc version 4.1.1 > (Gentoo 4.1.1-r3)) #1 SMP PREEMPT Fri May 4 20:23:27 CEST 2007 > Command line: auto BOOT_IMAGE=gentoo-2.6.21 ro root=803 noapic irqpoll > acpi=force splash=verbose,theme:emergence video=vesa:ywrap,mtrr > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007e087000 (usable) > BIOS-e820: 000000007e087000 - 000000007e288000 (ACPI NVS) > BIOS-e820: 000000007e288000 - 000000007eebe000 (ACPI data) > BIOS-e820: 000000007eebe000 - 000000007eeef000 (ACPI NVS) > BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data) > BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 516231) 1 entries of 256 used > end_pfn_map = 1048576 > DMI 2.4 present. > ACPI: RSDP 000FE020, 0024 (r2 APPLE ) > ACPI: XSDT 7EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) > ACPI: FACP 7EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) > ACPI: DSDT 7EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309) > ACPI: FACS 7EEC0000, 0040 > ACPI: HPET 7EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) > ACPI: APIC 7EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) > ACPI: MCFG 7EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) > ACPI: ASF! 7EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) > ACPI: SBST 7EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) > ACPI: ECDT 7EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) > ACPI: SSDT 7EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) > ACPI: SSDT 7EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) > ACPI: SSDT 7EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 516231) 1 entries of 256 used > No mptable found. > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 > early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 516231 > On node 0 totalpages: 516134 > DMA zone: 56 pages used for memmap > DMA zone: 1329 pages reserved > DMA zone: 2614 pages, LIFO batch:0 > DMA32 zone: 7001 pages used for memmap > DMA32 zone: 505134 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 (Bootup-CPU) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: Skipping IOAPIC probe due to 'noapic' option. > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Nosave address range: 000000000009f000 - 00000000000a0000 > Nosave address range: 00000000000a0000 - 00000000000e0000 > Nosave address range: 00000000000e0000 - 0000000000100000 > Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) > SMP: Allowing 2 CPUs, 0 hotplug CPUs > PERCPU: Allocating 33536 bytes of per cpu data > Built 1 zonelists. Total pages: 507748 > Kernel command line: auto BOOT_IMAGE=gentoo-2.6.21 ro root=803 noapic > irqpoll acpi=force splash=verbose,theme:emergence video=vesa:ywrap,mtrr > Misrouted IRQ fixup and polling support enabled > This may significantly impact system performance > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > time.c: Detected 1995.003 MHz processor. > Console: colour dummy device 80x25 > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Checking aperture... > Calgary: detecting Calgary via BIOS EBDA area > Calgary: Unable to locate Rio Grande table in EBDA - bailing! > Memory: 2027440k/2064924k available (3105k kernel code, 36844k > reserved, 1490k data, 224k init) > Calibrating delay using timer specific routine.. 4015.87 BogoMIPS > (lpj=8031745) > Mount-cache hash table entries: 256 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > using mwait in idle threads. > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM2) > SMP alternatives: switching to UP code > ACPI: Core revision 20070126 > ACPI: setting ELCR to 0200 (from 0c00) > SMP motherboard not detected. > Using local APIC timer interrupts. > result 10390628 > Detected 10.390 MHz APIC timer. > SMP disabled > Brought up 1 CPUs > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG at f0000000 - ffffffff > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using PIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:02.0 > PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO > PCI quirk: region 0500-053f claimed by ICH6 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 9 devices > SCSI subsystem initialized > libata version 2.20 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post > a report > PCI-GART: No AMD northbridge found. > pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved > pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved > pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved > pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved > pnp: 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved > PCI: Ignore bogus resource 6 [0:0] of 0000:00: 02.0 > PCI: Bridge: 0000:00:1c.0 > IO window: 1000-1fff > MEM window: 90200000-902fffff > PREFETCH window: 90500000-905fffff > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: 90100000-901fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: 90000000-900fffff > PREFETCH window: disabled. > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > Time: tsc clocksource has been installed. > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 131072 (order: 9, 3145728 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > fuse init (API version 7.8) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00: 1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00: 1c.1:pcie02] > Allocate Port Service[0000:00:1c.1:pcie03] > vesafb: framebuffer at 0x80000000, mapped to 0xffffc20010100000, using > 3072k, total 16064k > vesafb: mode is 1024x768x16, linelength=2048, pages=9 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > ACPI: AC Adapter [ADP1] (off-line) > ACPI: Battery Slot [BAT0] (battery present) > input: Power Button (FF) as /class/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Lid Switch as /class/input/input1 > ACPI: Lid Switch [LID0] > input: Power Button (CM) as /class/input/input2 > ACPI: Power Button (CM) [PWRB] > input: Sleep Button (CM) as /class/input/input3 > ACPI: Sleep Button (CM) [SLPB] > ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > ACPI: SSDT 7EEB8C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309) > ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) > Monitor-Mwait will be used to enter C-1 state > Monitor-Mwait will be used to enter C-2 state > Monitor-Mwait will be used to enter C-3 state > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) > ACPI: Processor [CPU1] (supports 8 throttling states) > Time: hpet clocksource has been installed. > Real Time Clock Driver v1.12ac > Non-volatile memory driver v1.2 > intel_rng: FWH not detected > Linux agpgart interface v0.102 (c) Dave Jones > agpgart: Detected an Intel 945GM Chipset. > agpgart: Detected 16124K stolen memory. > agpgart: AGP aperture is 256M @ 0x80000000 > intelfb: Framebuffer driver for Intel(R) > 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets > intelfb: Version 0.9.4 > ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, > low) -> IRQ 10 > intelfb: Cannot reserve FB region. > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:01:00.0 to 64 > sky2 0000:01:00.0: v1.14 addr 0x90200000 irq 10 Yukon-EC (0xb6) rev 2 > sky2 eth0: addr 00:17:f2:f0:3f:02 > Linux video capture interface: v2.00 > saa7130/34: v4l2 driver version 0.2.14 loaded > input: Macintosh mouse button emulation as /class/input/input4 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, > low) -> IRQ 10 > ICH7: chipset revision 2 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x20b0-0x20b7, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x20b8-0x20bf, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: MATSHITADVD-R UJ-857D, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > Probing IDE interface ide1... > hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) > Uniform CD-ROM driver Revision: 3.20 > ata_piix 0000:00:1f.2: version 2.10ac1 > ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] > ata_piix 0000:00:1f.2: invalid MAP value 0 > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00: 1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0x00000000000120c8 ctl 0x00000000000120ee > bmdma 0x00000000000120a0 irq 11 > ata2: SATA max UDMA/133 cmd 0x00000000000120c0 ctl 0x00000000000120ea > bmdma 0x00000000000120a8 irq 11 > scsi0 : ata_piix > ATA: abnormal status 0x7F on port 0x00000000000120cf > ATA: abnormal status 0x7F on port 0x00000000000120cf > ata1.01: ATA-7: Hitachi HTS541616J9SA00, SB4AC7CP, max UDMA/133 > ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata1.01: configured for UDMA/133 > scsi1 : ata_piix > ATA: abnormal status 0x7F on port 0x00000000000120c7 > scsi 0:0:1:0: Direct-Access ATA Hitachi HTS54161 SB4A PQ: 0 > ANSI: 5 > SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 sda3 sda4 > sd 0:0:1:0: Attached scsi disk sda > ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00: 1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00: 1d.7: irq 11, io mem 0x90445400 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > Initializing USB Mass Storage driver... > usb 1-4: new high speed USB device using ehci_hcd and address 3 > usb 1-4: configuration #1 chosen from 1 choice > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > PNP: No PS/2 controller found. Probing ports directly. > i8042.c: No controller found. > mice: PS/2 mouse device common for all mice > i2c /dev entries driver > applesmc: Apple MacBook detected: > applesmc: - Model with accelerometer > applesmc: - Model without light sensors and backlight > applesmc: - Model with 12 temperature sensors > applesmc: received a shock interrupt > applesmc: accelerometer successfully initialized. > applesmc: device successfully initialized. > applesmc: 1 fans found. > input: applesmc as /class/input/input5 > applesmc: driver successfully loaded. > coretemp: This driver uses undocumented features of Core CPU. > Temperature might be wrong! > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > IO APIC resources could be not be allocated. > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 224k freed > ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 > ACPI: PCI Interrupt 0000:00: 1b.0[A] -> Link [LNKG] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > USB Universal Host Controller Interface driver v3.0 > ath_hal: module license 'Proprietary' taints kernel. > ath_hal: 0.9.30.10 <http://0.9.30.10> (AR5210, AR5211, AR5212, AR5416, > RF5111, RF5112, RF2413, RF5413, RF2133) > wlan: 0.8.4.2 <http://0.8.4.2> (svn r2249) > ath_pci: 0.9.4.5 <http://0.9.4.5> (svn r2249) > hda_codec: STAC922x, Apple subsys_id=106b2200 > ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > ath_rate_sample: 1.2 (svn r2249) > wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: H/W encryption support: WEP AES AES_CCM TKIP > wifi0: mac 12.10 phy 8.1 radio 12.0 > wifi0: Use hw queue 1 for WME_AC_BE traffic > wifi0: Use hw queue 0 for WME_AC_BK traffic > wifi0: Use hw queue 2 for WME_AC_VI traffic > wifi0: Use hw queue 3 for WME_AC_VO traffic > wifi0: Use hw queue 8 for CAB traffic > wifi0: Use hw queue 9 for beacons > wifi0: Atheros 5418: mem=0x90100000, irq=11 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00: 1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002080 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1 : new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002060 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00: 1d.2[C] -> Link [LNKC] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 10, io base 0x00002040 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 10, io base 0x00002020 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > usb 2-2: new full speed USB device using uhci_hcd and address 2 > usb 2-2: configuration #1 chosen from 1 choice > usb 4-2: new full speed USB device using uhci_hcd and address 2 > usb 4-2: configuration #1 chosen from 1 choice > usb 5-1: new full speed USB device using uhci_hcd and address 2 > usb 5-1: configuration #1 chosen from 1 choice > appletouch Geyser 3 inited. > input: appletouch as /class/input/input6 > usbcore: registered new interface driver appletouch > EXT3 FS on sda3, internal journal > input: Apple Computer Apple Internal Keyboard / Trackpad as > /class/input/input7 > input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard > / Trackpad] on usb-0000:00:1d.0-2 > input: Apple Computer Apple Internal Keyboard / Trackpad as > /class/input/input8 > input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / > Trackpad] on usb-0000:00: 1d.0-2 > input: HID 05ac:1000 as /class/input/input9 > input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 > input: HID 05ac:1000 as /class/input/input10 > input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00: 1d.3-1 > usbcore: registered new interface driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > [drm] Initialized drm 1.1.0 20060810 > [drm] Initialized i915 1.6.0 20060119 on minor 0 > input: Apple MacIntel infrared remote control driver as > /class/input/input11 > usbcore: registered new interface driver appleir > drivers/usb/input/appleir.c: v1.2:USB Apple MacIntel IR Receiver driver > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-2, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-4, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-0, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > sky2 eth0: enabling interface > sky2 eth0: ram buffer 48K > sky2 eth0: disabling interface > sky2 eth0: enabling interface > sky2 eth0: ram buffer 48K > appletouch: incomplete data package (first byte: 2, length: 4). > hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01). > Trying to recover by ending request. > > Regards > Sven > > -- > Sven Anders <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> () Ascii Ribbon Campaign > /\ Support plain > text e-mail > ANDURAS service solutions AG > Innstraße 71 - 94036 Passau - Germany > Web: www.anduras.de <http://www.anduras.de> - Tel: +49 (0)851-4 90 > 50-0 - Fax: +49 (0)851-4 90 50-55 > > Rechtsform: Aktiengesellschaft - Sitz: Passau - Amtsgericht Passau > HRB 6032 > Mitglieder des Vorstands: Sven Anders, Marcus Junker > Vorsitzender des Aufsichtsrats: Dipl. Kfm. Thomas Träger > > > > Thx in advance. > > -- > ~~~~~ > | klessou | > ~~~~~ > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > ------------------------------------------------------------------------ > > _______________________________________________ > Mactel-linux-users mailing list > Mactel-linux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mactel-linux-users >
Problem in my case was using "noapic" as boot flags. Delete it and c2d returns. Best Regards Christian Rossi ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Mactel-linux-users mailing list Mactel-linux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mactel-linux-users
