Hi Andrew, You needn’t reset your AirPort Extreme if you don’t want to, although it’s certainly a very quick way to get going. Instead, just make sure the WAN port is connected to your v130 (that’s the port nearest the USB socket on AirPort) and that your modem is connected to phone line and power, and then change from bridge mode to PPPoE, entering the needed parameters. AirPort Utility is included in OS X, and you can download it for iOS. The settings are under “Internet”. I suggest you visit the other sections in both utilities and verify all is well, since changing from bridge to router is quite a big change, and you will find that more settings are opened up to you, if you need them (DHCP, NAT options, etc).
Cheers, Sabahattin -- The following information is important for all members of the Mac Visionaries list. If you have any questions or concerns about the running of this list, or if you feel that a member's post is inappropriate, please contact the owners or moderators directly rather than posting on the list itself. Your Mac Visionaries list moderator is Mark Taylor and your owner is Cara Quinn - you can reach Cara at [email protected] The archives for this list can be searched at: http://www.mail-archive.com/[email protected]/ --- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/macvisionaries. For more options, visit https://groups.google.com/d/optout.
