Hi Jeff, your design will not work efficiently. The problem is that 822 router can’t be put in to a bridge mode so needs to be the head end router. If you don’t, you’ll have a double NAT situation where the link will get a WAN address from the bell modem of 192.168.2.x and then will NAT translate that to 192.168.0.x. Your bell modem will then again translate from 192.168.2.x to some public IP assigned to the head end of the modem. You need an access point, not a router for what you’re trying to do and or as mentioned put the bell modem in bridge mode and get several IP addresses for each of your devices.
> On Jan 31, 2017, at 11:28 AM, Jeff Berwick <mailingli...@berwick.name> wrote: > > The way that the network is set up, the Bell modem is the one that provides > the router function for the rest of the network and has been working very > well like this. If I wanted the new router to take over this job, it would > mean rearranging the location of all the devices as the new router connects > to a Time Capsule bin bridge mode before connecting to the internet. > > Jeff > >> On Jan 31, 2017, at 11:25 AM, Caitlyn Furness <caitlyn.furn...@gmail.com> >> wrote: >> >> Have you turned bridge mode on on the bell modem?? >> >> We have Bell here as well, and I had to go in and turn off the router >> functions of the bell router/modem, then let my airport extreme act as the >> router. After I did that, no more problems.. Basically, now all we need >> the Bell box for is to provide internet service, not act as a router.. >> >> hah, >> Cait >> >>> On Jan 31, 2017, at 11:22 AM, Jeff Berwick <mailingli...@berwick.name> >>> wrote: >>> >>> Hi there, >>> >>> My mother in law has purchased a DLink DIR-822 router to add into our home >>> network. Currently, we have 2 Airport Time Capsules, 1 Airport Extreme, 2 >>> Airport Expresses and the main Bell modem that supplies the house with >>> internet. >>> >>> We have managed to connect the router to the network and get the internet >>> working, but it seems to have established its own network. As a result, I >>> can see all the Mac computers that are connected to this router, but can’t >>> access any of the Mac computers that are on the networking prior to where >>> this device is connected. >>> >>> I think that this router is acting as a router instead of a bridge, but I >>> can’t figure out how to put it into bridge mode. It seems to have given >>> itself an ip address of 192.168.0.1, when all other devices obtain their ip >>> from the Bell modem and it generally assigns its in the range 192.168.2.xxx. >>> >>> I haven’t been able to find any helpful information on the internet; any >>> thoughts? >>> >>> Thx, >>> Jeff >>> >>> >>> -- >>> The following information is important for all members of the Mac >>> Visionaries list. >>> >>> If you have any questions or concerns about the running of this list, or if >>> you feel that a member's post is inappropriate, please contact the owners >>> or moderators directly rather than posting on the list itself. >>> >>> Your Mac Visionaries list moderator is Mark Taylor. You can reach mark at: >>> macvisionaries+modera...@googlegroups.com and your owner is Cara Quinn - >>> you can reach Cara at caraqu...@caraquinn.com >>> >>> The archives for this list can be searched at: >>> http://www.mail-archive.com/macvisionaries@googlegroups.com/ >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "MacVisionaries" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to macvisionaries+unsubscr...@googlegroups.com. >>> To post to this group, send email to macvisionaries@googlegroups.com. >>> Visit this group at https://groups.google.com/group/macvisionaries. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> The following information is important for all members of the Mac >> Visionaries list. >> >> If you have any questions or concerns about the running of this list, or if >> you feel that a member's post is inappropriate, please contact the owners or >> moderators directly rather than posting on the list itself. >> >> Your Mac Visionaries list moderator is Mark Taylor. You can reach mark at: >> macvisionaries+modera...@googlegroups.com and your owner is Cara Quinn - you >> can reach Cara at caraqu...@caraquinn.com >> >> The archives for this list can be searched at: >> http://www.mail-archive.com/macvisionaries@googlegroups.com/ >> --- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to macvisionaries+unsubscr...@googlegroups.com. >> To post to this group, send email to macvisionaries@googlegroups.com. >> Visit this group at https://groups.google.com/group/macvisionaries. >> For more options, visit https://groups.google.com/d/optout. > > > -- > The following information is important for all members of the Mac Visionaries > list. > > If you have any questions or concerns about the running of this list, or if > you feel that a member's post is inappropriate, please contact the owners or > moderators directly rather than posting on the list itself. > > Your Mac Visionaries list moderator is Mark Taylor. You can reach mark at: > macvisionaries+modera...@googlegroups.com and your owner is Cara Quinn - you > can reach Cara at caraqu...@caraquinn.com > > The archives for this list can be searched at: > http://www.mail-archive.com/macvisionaries@googlegroups.com/ > --- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to macvisionaries+unsubscr...@googlegroups.com. > To post to this group, send email to macvisionaries@googlegroups.com. > Visit this group at https://groups.google.com/group/macvisionaries. > For more options, visit https://groups.google.com/d/optout. -- The following information is important for all members of the Mac Visionaries list. If you have any questions or concerns about the running of this list, or if you feel that a member's post is inappropriate, please contact the owners or moderators directly rather than posting on the list itself. Your Mac Visionaries list moderator is Mark Taylor. You can reach mark at: macvisionaries+modera...@googlegroups.com and your owner is Cara Quinn - you can reach Cara at caraqu...@caraquinn.com The archives for this list can be searched at: http://www.mail-archive.com/macvisionaries@googlegroups.com/ --- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to macvisionaries+unsubscr...@googlegroups.com. To post to this group, send email to macvisionaries@googlegroups.com. Visit this group at https://groups.google.com/group/macvisionaries. For more options, visit https://groups.google.com/d/optout.
