Hi Tim, Thanks and that is pretty much what I thought and determined from what I read. I understand the 8211G hardware will drag a 8211N network down, but from what I have been told, it is not that bad in general. For example, if the G devices are not connected, I'm not going to see any loss unless they do connect. Since my ADSL connection is slow, any inbound traffic will not benefit in any case and only machine to machine transfers would really benefit (or streaming). SO, I stopped segregating the G devices from the N devices and my connection issues went away. The goal at the end of the day was to ensure that when we were using our iPads or iPhones and moving about the house, the devices would switch from the Time Capsule to the Express without loosing the connection. THe way I had it setup, I effectively split my network into two networks and created problems for myself. I did this by going into the options of the Time Capsule and giving the 5Ghz network a different name. APple does not clearly indicate what all happens, but essentially that seems to break the network into two parts. I know all this probably isn't making much sense, but the good news is it seems to be working. :) I also learned that any device capable of utilizing the 5Ghz network will do so and any 2.4Ghz device will connect to that 5Ghz network. Here I thought the iPad was able to connect to a 5Ghz network, but it is connecting at 2.4Ghz. Ah this wireless stuff gives me a headache. :() If it was not so difficult, I'd run cable and setting up the network would be easier in many ways. HOwever, my wife has fits about holes in the walls. :) That is another subject for another day. :)
Thanks, Scott On Apr 25, 2011, at 12:36 PM, Tim Kilburn wrote: > Hi Scott, > > Which version of Time Capsule do you have? The Simultaneous Dual Bandwidth > one transmits both a 5GHz and 2.4 GHz signal simultaneously whereas the older > version can only transmit either/or. The Airport Express is similar to the > latter, whereby it can only transmit either/or. > > If using the newer Simultaneous Dual Bandwidth version, the Airport Express > will automatically connect using the 2.4 GHz band when extending with an > Airport Express as long as you haven't modified it's original settings. > > If you're using the older version, you will need to leave it on 2.4 GHz as > the extending process only works properly on that band. > > Hope this makes some sort of sense. If you wish, you can contact me off-list > for more info. > > Later... > > On 2011-04-25, at 1:30 AM, Simon Cavendish wrote: > >> I understand from reading "take control books" k- and I am currently >> struggling with setting up a similar network to yours, Scott, that iPad has >> not the capacity to connect to 5ghz radio as it is still 8211G rather than >> N. With Express, it has as you point out a dual capacity and it should >> switch autimatically unless you do not allow it in the configurations. I too >> find the configuring troublesome as I can't seem to access certain options >> when extending the network. >> >> I will see what else I can find. >> >> Simon >> On 25 Apr 2011, at 01:57, Scott Howell wrote: >> >>> All, >>> >>> I hope this will make sense, but this is a little complicated perhaps. >>> Currently I have an AirPort Time Capsule as the main router and an AirPort >>> Express on another floor to extend the range of the network. The Time >>> Capsule has both a 2.4Ghz and 5Ghz radio. I learned the AIrPort Express >>> does as well. I have effectively two networks it seems in that devices can >>> connect to the 2.4Ghz or 5Ghz network, which has the same name accept the >>> 5Ghz network actually states network name followed by 5Ghz. The goal of >>> course was to segregate the 8211G devices from the 8211N devices by >>> allowing devices supporting 8211N to only access the 5Ghz network. THis >>> seems to work fine, but I noticed that my iPad was loosing it's connection >>> until I allowed it to connect to the AirPort Express by entering the >>> password (which is the same for the entire network). My thought was that >>> perhaps for some reason although the Express is extending the network, the >>> iPad was not making the switch to the extender. So, that got me to >>> wondering if the iPad was connecting to the 2.4Ghz or 5Ghz portion/radio of >>> the network. I'm still not entirely sure since it seems the AirPort Express >>> when setup does not allow access to a lot of the configuration options. >>> Well ok, of course you can change anything, but when configured to extend >>> the range of the network, it would make sense that you would not need >>> access to all options (if that made sense). >>> So, once I connected it seem to behave as expected, but at that time I did >>> not realize the AirPort Express had both 2.4 and 5Ghz radios. So, after all >>> that prattle, does anyone know a bit on how these routers work as far as >>> handing off traffic to an extender and how a device knows to make the >>> switch? I suspect I know more than I realize, but just haven't found the >>> best resource to learn. >>> >>> Thanks, >>> >>> Scott >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "MacVisionaries" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/macvisionaries?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/macvisionaries?hl=en. >> > > Tim Kilburn > Fort McMurray, AB Canada > > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
