#414: After properly installed the latest version on FC5 test2, the "iwlist ath0
scan" showed "no scan results"
-----------------------------------+----------------------------------------
      Reporter:  [EMAIL PROTECTED]  |       Owner:       
          Type:  defect            |      Status:  new  
      Priority:  major             |   Milestone:       
     Component:  madwifi: other    |     Version:  trunk
    Resolution:                    |    Keywords:       
Patch_attached:  0                 |  
-----------------------------------+----------------------------------------
Comment (by [EMAIL PROTECTED]):

 Sorry for the late reply, here are the commands I used:
 {{{
 [EMAIL PROTECTED] ~]# modprobe ath_pci rfkill=0
 [EMAIL PROTECTED] ~]# iwconfig
 lo        no wireless extensions.

 wifi0     no wireless extensions.
 //I set the according essid to the “nomad” which work well on WinXP in
 ifcfg-ath0
 ath0      IEEE 802.11g  ESSID:"nomad"  Nickname:"localhost.localdomain"
           Mode:Managed  Frequency:2.427 GHz  Access Point:
 00:00:00:00:00:00
           Bit Rate:1 Mb/s   Tx-Power:17 dBm   Sensitivity=0/3
           Retry:off   RTS thr:off   Fragment thr:off
           Encryption key:off
           Power Management:off
           Link Quality=47/94  Signal level=-48 dBm  Noise level=-95 dBm
           Rx invalid nwid:13  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:0  Invalid misc:0   Missed beacon:0

 eth0      no wireless extensions.

 sit0      no wireless extensions.
 [EMAIL PROTECTED] ~]# modprobe wlan_scan_sta
 [EMAIL PROTECTED] ~]# ifconfig ath0 up
 [EMAIL PROTECTED] ~]# wlanconfig ath0 list scan
 [EMAIL PROTECTED] ~]# iwlist ath0 scan
 ath0      No scan results
 [EMAIL PROTECTED] ~]# dhclient ath0
 Internet Systems Consortium DHCP Client V3.0.3-RedHat
 Copyright 2004-2005 Internet Systems Consortium.
 All rights reserved.
 For info, please visit http://www.isc.org/products/DHCP

 Listening on LPF/ath0/00:11:f5:da:3e:91
 Sending on   LPF/ath0/00:11:f5:da:3e:91
 Sending on   Socket/fallback
 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 8
 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 14
 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 9
 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 9
 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 12
 DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 9
 No DHCPOFFERS received.
 No working leases in persistent database - sleeping.
 }}}

 The ifcfg-ath0 file is as follows:

 {{{
 DEVICE=ath0
 ONBOOT=no
 TYPE=Wireless
 BOOTPROTO=dhcp
 ESSID=nomad
 }}}
 Do I need to provide more information? Thanks a lot!

-- 
Ticket URL: <http://madwifi.org/ticket/414>
MadWifi <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity

Reply via email to