#474: Constant ath0: hardware error; ressetting after kernel upgarde to
2.6.15-1.1833
-------------------------------------+--------------------------------------
Reporter: dbakeman At comcast net | Owner:
Type: defect | Status: new
Priority: minor | Milestone: version 1.0.0 - first
stable release
Component: madwifi: driver | Version: trunk
Keywords: | Patch_attached: 0
-------------------------------------+--------------------------------------
I've been using 0.9.14.9 version with the 2.6.11-1.1369 kernel for 3
months no problems. I upgarded to the 2.6.15-1.1833 kernel a couple of
days ago and noticed when transferring files locally that I get this error
: "ath0: hardware error; ressetting" continuously. Things seem to
transfer just fine so it's not fatal but it never happened before. I went
ahead and updated to the trunk rebuilt and installed madwifi and the same
thing happened.
Here's an excerpt from the syslog:
{{{
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11 (level, low)
-> IRQ 11
Build date: Mar 16 2006
Debugging version (IEEE80211)
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: H/W encryption support: WEP AES AES_CCM TKIP
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
Debugging version (ATH)
ath0: Atheros 5212: mem=0xf4000000, irq=11
ath0: no IPv6 routers present
ath0: hardware error; resetting
ath0: hardware error; resetting
ath0: hardware error; resetting
.........
}}}
--
Ticket URL: <http://madwifi.org/ticket/474>
MadWifi <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity
