#393: Txpower malfunction
----------------------------------+-----------------------------------------
      Reporter:  anonymous        |       Owner:  dyqith                        
      
          Type:  defect           |      Status:  assigned                      
      
      Priority:  minor            |   Milestone:  version 1.0.0 - first stable 
release
     Component:  madwifi: driver  |     Version:  trunk                         
      
    Resolution:                   |    Keywords:                                
      
Patch_attached:  0                |  
----------------------------------+-----------------------------------------
Comment (by [EMAIL PROTECTED]):

 The NMP 8602 (FCC) still has problem with latest madwifi-ng SVN (r1663).
 400mw TXpower under 11bg can not be achieved.
 Basically all others power setting (that list out by "iwlist txpower") is
 ok.
 Spectrum showing the txpower achieved does not exceed cards with 40mw.
 Initial txpower (most of case) is 15mw. Wierdly, the initial txpower can
 be vary.
 Max txpower can be drove 19mw.

 Here some info:
 * Using Linux kernel 2.4.32, OS: CfLinux (www.cflinux.hu)

 * close look into chipset, found: AR5413A

 * PCI ID: cat /proc/pci
 {{{
   Ethernet controller: PCI device 168c:001b (rev 1).
 }}}

 * Exec: dmesg | tail -n40
 {{{
   ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
 RF5413)
   wlan: 0.8.4.2 (svn r1663)
   ath_rate_sample: 1.2 (svn r1663)
   ath_pci: 0.9.4.5 (svn r1663)
   wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
   wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
   wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
 24Mbps 36Mbps 48Mbps 54Mbps
   wifi0: H/W encryption support: WEP AES AES_CCM TKIP
   wifi0: mac 10.4 phy 6.1 radio 6.3
   wifi0: Use hw queue 1 for WME_AC_BE traffic
   wifi0: Use hw queue 0 for WME_AC_BK traffic
   wifi0: Use hw queue 2 for WME_AC_VI traffic
   wifi0: Use hw queue 3 for WME_AC_VO traffic
   wifi0: Use hw queue 8 for CAB traffic
   wifi0: Use hw queue 9 for beacons
   wifi0: Atheros 5212: mem=0xa0000000, irq=10
   ap0 (WE) : Buffer for request SIOCGIWPRIV too small (16<144)
   ap0 (WE) : Buffer for request SIOCGIWPRIV too small (32<144)
   ap0 (WE) : Buffer for request SIOCGIWPRIV too small (64<144)
   ap0 (WE) : Buffer for request SIOCGIWPRIV too small (128<144)
 }}}

 * Exec: iwlist ap0 txpower
 {{{
   ap0     8 available transmit-powers :
           0 dBm         (1 mW)
           7 dBm         (5 mW)
           9 dBm         (7 mW)
           11 dBm        (12 mW)
           13 dBm        (19 mW)
           15 dBm        (31 mW)
           17 dBm        (50 mW)
           19 dBm        (79 mW)
           Current Tx-Power:19 dBm     (79 mW)
 }}}

 * Exec: iwconfig ap0
 {{{
   ap0       IEEE 802.11g  ESSID:"eBAP"
             Mode:Master  Frequency:2.427 GHz  Access Point:
 00:02:6F:xx:xx:xx
             Bit Rate:0 kb/s   Tx-Power:19 dBm   Sensitivity=0/3
             Retry:off   RTS thr:off   Fragment thr:off
             Encryption key:xxxx-xxxx-xx   Security mode:restricted
             Power Management:off
             Link Quality=0/94  Signal level=-95 dBm  Noise level=-95 dBm
             Rx invalid nwid:2077  Rx invalid crypt:0  Rx invalid frag:0
             Tx excessive retries:0  Invalid misc:0   Missed beacon:0
 }}}

 * Exec: iwconfig ap0 txpower 20
 {{{
   Error for wireless request "Set Tx Power" (8B26) :
       SET failed on device ap0 ; Invalid argument.
 }}}

-- 
Ticket URL: <http://madwifi.org/ticket/393>
MadWifi <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Madwifi-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/madwifi-tickets

Reply via email to