#1993: ath_pci get FATAL-Error and VmWare
----------------------------+-----------------------------------------------
Reporter: ray | Type: defect
Status: new | Priority: minor
Component: madwifi: other | Version:
Keywords: | Patch_attached: 0
----------------------------+-----------------------------------------------
I installed the Patch madwifi-ng-r2756+ar5007.tar.gz for Atheros AR5007 on
my Ubuntu 8.04. Everything works fine but when I install virtualbox or
vmware i get an Fatal Error on ath_pci:
{{{
FATAL: Error inserting ath_pci
(/lib/modules/2.6.24-17-generic/net/ath_pci.ko): Unknown symbol in module,
or unknown parameter (see dmesg)
3
4 dmesg:
5 [ 15.615419] CPU: L2 Cache: 256K (64 bytes/line)
6 [ 15.615421] CPU 1(2) -> Core 1
7 [ 15.615422] AMD C1E detected late. Force timer broadcast.
8 [ 15.615424] CPU: After all inits, caps: 178bfbff ebd3fbff
00000000 00000410 00002001 00000000 0000011f 00000000
9 [ 15.615404] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57
stepping 02
10 [ 15.615420] Total of 2 processors activated (7604.98 BogoMIPS).
11 [ 15.615659] ENABLING IO-APIC IRQs
12 [ 15.615891] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
13 [ 15.655669] Brought up 2 CPUs
14 [ 15.655715] CPU0 attaching sched-domain:
15 [ 15.655717] domain 0: span 03
16 [ 15.655719] groups: 01 02
17 [ 15.655722] CPU1 attaching sched-domain:
18 [ 15.655724] domain 0: span 03
19 [ 15.655725] groups: 02 01
20 [ 15.655916] net_namespace: 64 bytes
21 [ 15.655922] Booting paravirtualized kernel on bare hardware
22 [ 15.656371] Time: 11:20:14 Date: 06/12/08
23 [ 15.656394] NET: Registered protocol family 16
24 [ 15.656570] EISA bus registered
25 [ 15.656574] ACPI: bus type pci registered
26 [ 15.677465] PCI: PCI BIOS revision 3.00 entry at 0xfda7d, last
bus=5
27 [ 15.677468] PCI: Using configuration type 1
28 [ 15.677469] Setting up standard PCI resources
29 [ 15.679208] ACPI: EC: Look up EC in DSDT
30 [ 15.681665] ACPI: Interpreter enabled
31 [ 15.681668] ACPI: (supports S0 S3 S4 S5)
32 [ 15.681679] ACPI: Using IOAPIC for interrupt routing
33 [ 15.685430] ACPI: EC: non-query interrupt received, switching to
interrupt mode
34 [ 15.755245] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66,
data = 0x62
35 [ 15.755248] ACPI: EC: driver started in interrupt mode
36 [ 15.755295] ACPI: PCI Root Bridge [PCI0] (0000:00)
37 [ 15.756164] PCI: Transparent bridge - 0000:00:08.0
38 [ 15.756347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
39 [ 15.756425] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P2P0._PRT]
40 [ 15.756443] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.XVR1._PRT]
41 [ 15.756468] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.XVR2._PRT]
42 [ 15.785536] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10
43 [ 15.785737] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11)
44 [ 15.785934] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0,
disabled.
45 [ 15.786131] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0,
disabled.
46 [ 15.786329] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0,
disabled.
47 [ 15.786525] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0,
disabled.
48 [ 15.786721] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0,
disabled.
49 [ 15.786917] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
50 [ 15.787113] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23)
*10
51 [ 15.787309] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23)
*11
52 [ 15.787506] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7
53 [ 15.787718] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23)
*11
54 [ 15.787915] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23)
*10
55 [ 15.788113] ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *10
56 [ 15.788310] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23)
*0, disabled.
57 [ 15.788508] ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5
58 [ 15.788711] ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23)
*10
59 [ 15.788913] ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23)
*11
60 [ 15.789111] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
61 [ 15.789252] Linux Plug and Play Support v0.97 (c) Adam Belay
62 [ 15.789283] pnp: PnP ACPI init
63 [ 15.789289] ACPI: bus type pnp registered
64 [ 15.825419] pnp: PnP ACPI: found 13 devices
65 [ 15.825421] ACPI: ACPI bus type pnp unregistered
66 [ 15.825424] PnPBIOS: Disabled by ACPI PNP
67 [ 15.825645] PCI: Using ACPI for IRQ routing
68 [ 15.825648] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
69 [ 15.855472] NET: Registered protocol family 8
70 [ 15.855473] NET: Registered protocol family 20
71 [ 15.855507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
72 [ 15.855511] hpet0: 3 32-bit timers, 25000000 Hz
73 [ 15.856552] AppArmor: AppArmor Filesystem Enabled
74 [ 15.859240] Time: hpet clocksource has been installed.
75 [ 15.859246] Clockevents: could not switch to one-shot mode: lapic
is not functional.
76 [ 15.859249] Could not switch to high resolution mode on CPU 0
77 [ 15.863453] Clockevents: could not switch to one-shot mode: lapic
is not functional.
78 [ 15.863457] Could not switch to high resolution mode on CPU 1
79 [ 15.871475] system 00:01: ioport range 0x360-0x361 has been
reserved
80 [ 15.871478] system 00:01: ioport range 0x4d0-0x4d1 has been
reserved
81 [ 15.871486] system 00:07: iomem range 0xe0000000-0xefffffff could
not be reserved
82 [ 15.871492] system 00:0a: ioport range 0x1000-0x107f has been
reserved
83 [ 15.871495] system 00:0a: ioport range 0x1080-0x10ff has been
reserved
84 [ 15.871498] system 00:0a: ioport range 0x1400-0x147f has been
reserved
85 [ 15.871500] system 00:0a: ioport range 0x1480-0x14ff has been
reserved
86 [ 15.871503] system 00:0a: ioport range 0x1800-0x187f has been
reserved
87 [ 15.871505] system 00:0a: ioport range 0x1880-0x18ff has been
reserved
88 [ 15.871512] system 00:0c: iomem range 0xffc00000-0xffffffff could
not be reserved
89 [ 15.871515] system 00:0c: iomem range 0xfec00000-0xfec00fff could
not be reserved
90 [ 15.871518] system 00:0c: iomem range 0xfee00000-0xfeefffff could
not be reserved
91 [ 15.871521] system 00:0c: iomem range 0xfed00000-0xfed00fff has
been reserved
92 [ 15.871524] system 00:0c: iomem range 0x0-0x0 could not be
reserved
93 [ 15.871526] system 00:0c: iomem range 0xfef00000-0xfef00fff has
been reserved
94 [ 15.901895] PCI: Bridge: 0000:00:08.0
95 [ 15.901897] IO window: disabled.
96 [ 15.901901] MEM window: d0500000-d05fffff
97 [ 15.901903] PREFETCH window: disabled.
98 [ 15.901906] PCI: Bridge: 0000:00:0c.0
99 [ 15.901908] IO window: 4000-4fff
100 [ 15.901911] MEM window: d0200000-d03fffff
101 [ 15.901913] PREFETCH window: d0000000-d01fffff
102 [ 15.901916] PCI: Bridge: 0000:00:0d.0
103 [ 15.901917] IO window: disabled.
104 [ 15.901919] MEM window: d0400000-d04fffff
105 [ 15.901921] PREFETCH window: disabled.
106 [ 15.901931] PCI: Setting latency timer of device 0000:00:08.0 to
64
107 [ 15.901941] PCI: Setting latency timer of device 0000:00:0c.0 to
64
108 [ 15.901948] PCI: Setting latency timer of device 0000:00:0d.0 to
64
109 [ 15.901959] NET: Registered protocol family 2
110 [ 15.939397] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
111 [ 15.939656] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
112 [ 15.940302] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
113 [ 15.940634] TCP: Hash tables configured (established 131072 bind
65536)
114 [ 15.940638] TCP reno registered
115 [ 15.955432] checking if image is initramfs... it is
116 [ 16.600824] Freeing initrd memory: 8216k freed
117 [ 16.600921] Simple Boot Flag at 0x36 set to 0x1
118 [ 16.601546] audit: initializing netlink socket (disabled)
119 [ 16.601556] audit(1213269614.512:1): initialized
120 [ 16.601720] highmem bounce pool size: 64 pages
121 [ 16.603527] VFS: Disk quotas dquot_6.5.1
122 [ 16.603592] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
123 [ 16.603706] io scheduler noop registered
124 [ 16.603708] io scheduler anticipatory registered
125 [ 16.603710] io scheduler deadline registered
126 [ 16.603719] io scheduler cfq registered (default)
127 [ 16.603762] Boot video device is 0000:00:12.0
128 [ 16.603870] PCI: Setting latency timer of device 0000:00:0c.0 to
64
129 [ 16.603893] assign_interrupt_mode Found MSI capability
130 [ 16.603912] Allocate Port Service[0000:00:0c.0:pcie00]
131 [ 16.603974] PCI: Setting latency timer of device 0000:00:0d.0 to
64
132 [ 16.603996] assign_interrupt_mode Found MSI capability
133 [ 16.604011] Allocate Port Service[0000:00:0d.0:pcie00]
134 [ 16.604224] isapnp: Scanning for PnP cards...
135 [ 16.956249] isapnp: No Plug & Play device found
136 [ 16.984353] Real Time Clock Driver v1.12ac
137 [ 16.984539] hpet_resources: 0xfed00000 is busy
138 [ 16.984562] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
139 [ 16.985701] RAMDISK driver initialized: 16 RAM disks of 65536K
size 1024 blocksize
140 [ 16.985765] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
141 [ 16.985859] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at
0x60,0x64 irq 1,12
142 [ 17.026004] serio: i8042 KBD port at 0x60,0x64 irq 1
143 [ 17.026009] serio: i8042 AUX port at 0x60,0x64 irq 12
144 [ 17.037599] mice: PS/2 mouse device common for all mice
145 [ 17.037717] EISA: Probing bus 0 at eisa.0
146 [ 17.037722] Cannot allocate resource for EISA slot 1
147 [ 17.037727] Cannot allocate resource for EISA slot 3
148 [ 17.037729] Cannot allocate resource for EISA slot 4
149 [ 17.037741] EISA: Detected 0 cards.
150 [ 17.037743] cpuidle: using governor ladder
151 [ 17.037745] cpuidle: using governor menu
152 [ 17.037819] NET: Registered protocol family 1
153 [ 17.037842] Using IPI No-Shortcut mode
154 [ 17.037873] registered taskstats version 1
155 [ 17.037991] Magic number: 12:337:327
156 [ 17.038115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
157 [ 17.038117] EDD information not available.
158 [ 17.038322] Freeing unused kernel memory: 368k freed
159 [ 17.069509] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
160 [ 18.321591] fuse init (API version 7.9)
161 [ 18.345006] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
162 [ 18.345014] ACPI: Processor [CPU0] (supports 8 throttling states)
163 [ 18.345049] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
Processor Device is not present [20070126]
164 [ 18.345059] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
Processor Device is not present [20070126]
165 [ 18.384702] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid
active threshold [0] [20070126]
166 [ 18.403152] ACPI: Thermal Zone [THRM] (53 C)
167 [ 18.858884] usbcore: registered new interface driver usbfs
168 [ 18.858905] usbcore: registered new interface driver hub
169 [ 18.858930] usbcore: registered new device driver usb
170 [ 18.864495] SCSI subsystem initialized
171 [ 18.864902] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
172 [ 18.864911] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] ->
GSI 23 (level, low) -> IRQ 16
173 [ 18.864923] PCI: Setting latency timer of device 0000:00:02.1 to
64
174 [ 18.864926] ehci_hcd 0000:00:02.1: EHCI Host Controller
175 [ 18.865183] ehci_hcd 0000:00:02.1: new USB bus registered,
assigned bus number 1
176 [ 18.865214] ehci_hcd 0000:00:02.1: debug port 1
177 [ 18.865218] PCI: cache line size of 64 is not supported by device
0000:00:02.1
178 [ 18.865228] ehci_hcd 0000:00:02.1: irq 16, io mem 0xd0889000
179 [ 18.866327] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host
Controller (OHCI) Driver
180 [ 18.874290] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
181 [ 18.874413] usb usb1: configuration #1 chosen from 1 choice
182 [ 18.874433] hub 1-0:1.0: USB hub found
183 [ 18.874439] hub 1-0:1.0: 5 ports detected
184 [ 18.895413] libata version 3.00 loaded.
185 [ 18.978539] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 22
186 [ 18.978549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z00O] ->
GSI 22 (level, low) -> IRQ 17
187 [ 18.978562] PCI: Setting latency timer of device 0000:00:04.1 to
64
188 [ 18.978565] ehci_hcd 0000:00:04.1: EHCI Host Controller
189 [ 18.978588] ehci_hcd 0000:00:04.1: new USB bus registered,
assigned bus number 2
190 [ 18.978614] ehci_hcd 0000:00:04.1: debug port 1
191 [ 18.978618] PCI: cache line size of 64 is not supported by device
0000:00:04.1
192 [ 18.978628] ehci_hcd 0000:00:04.1: irq 17, io mem 0xd0889400
193 [ 18.990097] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
194 [ 18.990210] usb usb2: configuration #1 chosen from 1 choice
195 [ 18.990231] hub 2-0:1.0: USB hub found
196 [ 18.990237] hub 2-0:1.0: 5 ports detected
197 [ 19.094482] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
198 [ 19.094493] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] ->
GSI 21 (level, low) -> IRQ 18
199 [ 19.094505] PCI: Setting latency timer of device 0000:00:02.0 to
64
200 [ 19.094508] ohci_hcd 0000:00:02.0: OHCI Host Controller
201 [ 19.094535] ohci_hcd 0000:00:02.0: new USB bus registered,
assigned bus number 3
202 [ 19.094551] ohci_hcd 0000:00:02.0: irq 18, io mem 0xd0886000
203 [ 19.151911] usb usb3: configuration #1 chosen from 1 choice
204 [ 19.151934] hub 3-0:1.0: USB hub found
205 [ 19.151941] hub 3-0:1.0: 5 ports detected
206 [ 19.254087] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 20
207 [ 19.254098] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z00N] ->
GSI 20 (level, low) -> IRQ 19
208 [ 19.254111] PCI: Setting latency timer of device 0000:00:04.0 to
64
209 [ 19.254114] ohci_hcd 0000:00:04.0: OHCI Host Controller
210 [ 19.254141] ohci_hcd 0000:00:04.0: new USB bus registered,
assigned bus number 4
211 [ 19.254156] ohci_hcd 0000:00:04.0: irq 19, io mem 0xd0887000
212 [ 19.311626] usb usb4: configuration #1 chosen from 1 choice
213 [ 19.311648] hub 4-0:1.0: USB hub found
214 [ 19.311654] hub 4-0:1.0: 5 ports detected
215 [ 19.414538] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
216 [ 19.414551] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK1] ->
GSI 11 (level, low) -> IRQ 11
217 [ 19.466242] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[d0500000-d05007ff] Max Packet=[2048] IR/IT contexts=[4/4]
218 [ 19.470667] PCI: Setting latency timer of device 0000:00:06.0 to
64
219 [ 19.473647] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
220 [ 19.473650] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] ->
GSI 23 (level, low) -> IRQ 16
221 [ 19.473686] PCI: Setting latency timer of device 0000:00:09.0 to
64
222 [ 19.473697] ACPI: PCI interrupt for device 0000:00:09.0 disabled
223 [ 19.476866] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
224 [ 19.477199] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
225 [ 19.477202] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] ->
GSI 22 (level, low) -> IRQ 17
226 [ 19.477208] PCI: Setting latency timer of device 0000:00:0a.0 to
64
227 [ 19.741065] usb 4-1: new low speed USB device using ohci_hcd and
address 2
228 [ 19.958811] usb 4-1: configuration #1 chosen from 1 choice
229 [ 19.975672] usbcore: registered new interface driver hiddev
230 [ 19.982829] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input2
231 [ 19.997147] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @
1, addr 00:1b:38:cb:13:44
232 [ 19.997152] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq
gbit lnktim msi desc-v3
233 [ 19.997413] ahci 0000:00:09.0: version 3.0
234 [ 19.997426] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] ->
GSI 23 (level, low) -> IRQ 16
235 [ 20.012659] input,hidraw0: USB HID v1.10 Mouse [Logitech USB
Optical Mouse] on usb-0000:00:04.0-1
236 [ 20.012678] usbcore: registered new interface driver usbhid
237 [ 20.012681] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-
core.c: v2.6:USB HID core driver
238 [ 20.747524] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00023f7cba409a64]
239 [ 21.002996] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3
Gbps 0xf impl IDE mode
240 [ 21.003001] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio
slum part
241 [ 21.003006] PCI: Setting latency timer of device 0000:00:09.0 to
64
242 [ 21.003332] scsi0 : ahci
243 [ 21.003392] scsi1 : ahci
244 [ 21.003426] scsi2 : ahci
245 [ 21.003460] scsi3 : ahci
246 [ 21.003528] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port
0xd0884100 irq 221
247 [ 21.003531] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port
0xd0884180 irq 221
248 [ 21.003533] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port
0xd0884200 irq 221
249 [ 21.003536] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port
0xd0884280 irq 221
250 [ 21.661911] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
251 [ 22.039772] ata1.00: ATA-8: TOSHIBA MK1646GSX, LB113J, max
UDMA/100
252 [ 22.039777] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ
(depth 0/32)
253 [ 22.040621] ata1.00: configured for UDMA/100
254 [ 22.360765] ata2: SATA link down (SStatus 0 SControl 300)
255 [ 22.684236] ata3: SATA link down (SStatus 0 SControl 300)
256 [ 23.003712] ata4: SATA link down (SStatus 0 SControl 300)
257 [ 23.003819] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11
PQ: 0 ANSI: 5
258 [ 23.003954] pata_amd 0000:00:06.0: version 0.3.10
259 [ 23.004001] PCI: Setting latency timer of device 0000:00:06.0 to
64
260 [ 23.004235] scsi4 : pata_amd
261 [ 23.004424] scsi5 : pata_amd
262 [ 23.004761] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma
0x30c0 irq 14
263 [ 23.004764] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma
0x30c8 irq 15
264 [ 23.012042] Driver 'sd' needs updating - please use bus_type
methods
265 [ 23.012122] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
(160042 MB)
266 [ 23.012135] sd 0:0:0:0: [sda] Write Protect is off
267 [ 23.012137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
268 [ 23.012154] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
269 [ 23.012200] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
(160042 MB)
270 [ 23.012209] sd 0:0:0:0: [sda] Write Protect is off
271 [ 23.012211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
272 [ 23.012225] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
273 [ 23.012229] sda: sda1 sda2 sda3 sda4 < sda5 >
274 [ 23.118476] sd 0:0:0:0: [sda] Attached SCSI disk
275 [ 23.123263] sd 0:0:0:0: Attached scsi generic sg0 type 0
276 [ 23.335502] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max
UDMA/33
277 [ 23.519088] ata5.00: configured for UDMA/33
278 [ 23.519126] ata6: port disabled. ignoring.
279 [ 23.522672] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03
PQ: 0 ANSI: 5
280 [ 23.522755] scsi 4:0:0:0: Attached scsi generic sg1 type 5
281 [ 23.531308] Driver 'sr' needs updating - please use bus_type
methods
282 [ 23.548312] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
283 [ 23.548317] Uniform CD-ROM driver Revision: 3.20
284 [ 23.548368] sr 4:0:0:0: Attached scsi CD-ROM sr0
285 [ 23.599868] Attempting manual resume
286 [ 23.599873] swsusp: Resume From Partition 8:5
287 [ 23.599874] PM: Checking swsusp image.
288 [ 23.600058] PM: Resume from disk failed.
289 [ 23.644575] kjournald starting. Commit interval 5 seconds
290 [ 23.644593] EXT3-fs: mounted filesystem with ordered data mode.
291 [ 34.097735] input: PC Speaker as
/devices/platform/pcspkr/input/input3
292 [ 34.153694] ACPI: WMI-Acer: Mapper loaded
293 [ 34.198345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
294 [ 34.233290] shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
295 [ 34.386329] input: Power Button (FF) as
/devices/virtual/input/input4
296 [ 34.444892] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
297 [ 34.444900] acer_acpi: Detected Acer WMID interface
298 [ 34.493718] ACPI: Power Button (FF) [PWRF]
299 [ 34.493789] input: Lid Switch as /devices/virtual/input/input5
300 [ 34.493922] Linux agpgart interface v0.102
301 [ 34.546231] ACPI: Lid Switch [LID]
302 [ 34.546307] input: Sleep Button (CM) as
/devices/virtual/input/input6
303 [ 34.596643] ACPI: Sleep Button (CM) [SLPB]
304 [ 34.596730] input: Power Button (CM) as
/devices/virtual/input/input7
305 [ 34.645359] ACPI: Power Button (CM) [PWRB]
306 [ 34.736985] input: PS/2 Mouse as /devices/virtual/input/input8
307 [ 34.822583] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input9
308 [ 34.859342] nvidia: module license 'NVIDIA' taints kernel.
309 [ 35.243782] sdhci: Secure Digital Host Controller Interface
driver
310 [ 35.243787] sdhci: Copyright(c) Pierre Ossman
311 [ 35.243831] sdhci: SDHCI controller found at 0000:01:04.1
[1180:0822] (rev 22)
312 [ 35.244156] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
313 [ 35.244160] ACPI: PCI Interrupt 0000:01:04.1[B] -> Link [LNK2] ->
GSI 11 (level, low) -> IRQ 11
314 [ 35.244177] sdhci:slot0: Will use DMA mode even though HW doesn't
fully claim to support it.
315 [ 35.244217] mmc0: SDHCI at 0xd0500800 irq 11 DMA
316 [ 35.377386] ACPI: AC Adapter [ACAD] (on-line)
317 [ 35.644509] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17
318 [ 35.644520] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] ->
GSI 17 (level, low) -> IRQ 20
319 [ 35.644527] PCI: Setting latency timer of device 0000:00:12.0 to
64
320 [ 35.645648] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12
Thu Feb 14 17:53:07 PST 2008
321 [ 35.675019] ACPI: Battery Slot [BAT1] (battery absent)
322 [ 35.740272] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111,
RF5112, RF2413, RF5413)
323 [ 35.795094] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
324 [ 35.795099] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] ->
GSI 21 (level, low) -> IRQ 18
325 [ 35.795120] PCI: Setting latency timer of device 0000:00:07.0 to
64
326 [ 35.922673] wlan: 0.8.4.2 (0.9.4)
327 [ 35.957567] ath_pci: disagrees about version of symbol
_ath_hal_attach
328 [ 35.957573] ath_pci: Unknown symbol _ath_hal_attach
329 [ 35.957700] ath_pci: disagrees about version of symbol
ath_hal_process_noisefloor
330 [ 35.957702] ath_pci: Unknown symbol ath_hal_process_noisefloor
331 [ 35.957952] ath_pci: disagrees about version of symbol
ath_hal_computetxtime
332 [ 35.957954] ath_pci: Unknown symbol ath_hal_computetxtime
333 [ 35.958194] ath_pci: disagrees about version of symbol
ath_hal_mhz2ieee
334 [ 35.958197] ath_pci: Unknown symbol ath_hal_mhz2ieee
335 [ 35.958424] ath_pci: Unknown symbol _ath_hal_detach
336 [ 35.959464] ath_pci: disagrees about version of symbol
ath_hal_init_channels
337 [ 35.959467] ath_pci: Unknown symbol ath_hal_init_channels
338 [ 35.959648] ath_pci: disagrees about version of symbol
ath_hal_getwirelessmodes
339 [ 35.959650] ath_pci: Unknown symbol ath_hal_getwirelessmodes
340 [ 37.571327] lp: driver loaded but no devices found
341 [ 37.631850] snd-bt-sco revision 1.19 $
342 [ 37.631873] snd-bt-sco: snd-bt-scod thread starting
343 [ 37.746699] Adding 6482188k swap on /dev/sda5. Priority:-1
extents:1 across:6482188k
344 [ 38.315311] EXT3 FS on sda3, internal journal
345 [ 38.485246] device-mapper: uevent: version 1.0.3
346 [ 38.485275] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02)
initialised: [EMAIL PROTECTED]
347 [ 40.063086] ip_tables: (C) 2000-2006 Netfilter Core Team
348 [ 40.702225] No dock devices found.
349 [ 41.048131] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core
Processor TK-57 processors (2 cpu cores) (version 2.20.00)
350 [ 41.048056] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x13
351 [ 41.048061] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14
352 [ 41.048063] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x15
353 [ 41.048065] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1a
354 [ 44.138684] apm: BIOS not found.
355 [ 44.374275] ppdev: user-space parallel port driver
356 [ 44.606806] audit(1213262443.208:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=5457 profile="/usr/sbin/cupsd" namespace="default"
357 [ 44.833653] vboxdrv: Trying to deactivate the NMI watchdog
permanently...
358 [ 44.833659] vboxdrv: Successfully done.
359 [ 44.833661] vboxdrv: Found 2 processor cores.
360 [ 44.833683] vboxdrv: fAsync=1 u64DiffCores=199074.
361 [ 44.833726] vboxdrv: TSC mode is 'asynchronous', kernel timer
mode is 'normal'.
362 [ 44.833728] vboxdrv: Successfully loaded version 1.6.0 (interface
0x00070001).
363 [ 45.146279] tun: Universal TUN/TAP device driver, 1.6
364 [ 45.146285] tun: (C) 1999-2004 Max Krasnyansky
<[EMAIL PROTECTED]>
365 [ 45.355492] Clocksource tsc unstable (delta = -187549318 ns)
366 [ 46.031313] Bluetooth: Core ver 2.11
367 [ 46.031391] NET: Registered protocol family 31
368 [ 46.031393] Bluetooth: HCI device and connection manager
initialized
369 [ 46.031396] Bluetooth: HCI socket layer initialized
370 [ 46.044196] Bluetooth: L2CAP ver 2.9
371 [ 46.044202] Bluetooth: L2CAP socket layer initialized
372 [ 46.089715] Bluetooth: RFCOMM socket layer initialized
373 [ 46.089729] Bluetooth: RFCOMM TTY layer initialized
374 [ 46.089731] Bluetooth: RFCOMM ver 1.8
375 [ 47.465384] NET: Registered protocol family 17
376 [ 50.523574] NET: Registered protocol family 10
377 [ 50.523783] lo: Disabled Privacy Extensions
378 [ 55.776611] eth0: no IPv6 routers present
379 [ 65.830687] CPU0 attaching NULL sched-domain.
380 [ 65.830696] CPU1 attaching NULL sched-domain.
381 [ 65.845246] CPU0 attaching sched-domain:
382 [ 65.845252] domain 0: span 03
383 [ 65.845254] groups: 01 02
384 [ 65.845257] CPU1 attaching sched-domain:
385 [ 65.845259] domain 0: span 03
386 [ 65.845260] groups: 02 01
387 [ 316.153148] atkbd.c: Unknown key pressed (translated set 2, code
0xb3 on isa0060/serio0).
388 [ 316.153153] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it
known.
389 [ 316.183308] atkbd.c: Unknown key released (translated set 2,
code 0xb3 on isa0060/serio0).
390 [ 316.183313] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it
known.
391 [ 316.228275] atkbd.c: Unknown key pressed (translated set 2, code
0xb3 on isa0060/serio0).
392 [ 316.228280] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it
known.
393 [ 316.271875] atkbd.c: Unknown key released (translated set 2,
code 0xb3 on isa0060/serio0).
394 [ 316.271881] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it
known.
395 [ 316.304699] atkbd.c: Unknown key pressed (translated set 2, code
0xb3 on isa0060/serio0).
396 [ 316.304703] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it
known.
397 [ 316.349169] atkbd.c: Unknown key released (translated set 2,
code 0xb3 on isa0060/serio0).
398 [ 316.349173] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it
known.
399 [ 774.546466] ath_pci: disagrees about version of symbol
_ath_hal_attach
400 [ 774.546477] ath_pci: Unknown symbol _ath_hal_attach
401 [ 774.546616] ath_pci: disagrees about version of symbol
ath_hal_process_noisefloor
402 [ 774.546618] ath_pci: Unknown symbol ath_hal_process_noisefloor
403 [ 774.546894] ath_pci: disagrees about version of symbol
ath_hal_computetxtime
404 [ 774.546897] ath_pci: Unknown symbol ath_hal_computetxtime
405 [ 774.547159] ath_pci: disagrees about version of symbol
ath_hal_mhz2ieee
406 [ 774.547162] ath_pci: Unknown symbol ath_hal_mhz2ieee
407 [ 774.547403] ath_pci: Unknown symbol _ath_hal_detach
408 [ 774.548497] ath_pci: disagrees about version of symbol
ath_hal_init_channels
409 [ 774.548502] ath_pci: Unknown symbol ath_hal_init_channels
410 [ 774.548707] ath_pci: disagrees about version of symbol
ath_hal_getwirelessmodes
411 [ 774.548711] ath_pci: Unknown symbol ath_hal_getwirelessmodes
412 [ 809.319851] ath_pci: disagrees about version of symbol
_ath_hal_attach
413 [ 809.319861] ath_pci: Unknown symbol _ath_hal_attach
414 [ 809.320009] ath_pci: disagrees about version of symbol
ath_hal_process_noisefloor
415 [ 809.320012] ath_pci: Unknown symbol ath_hal_process_noisefloor
416 [ 809.320287] ath_pci: disagrees about version of symbol
ath_hal_computetxtime
417 [ 809.320290] ath_pci: Unknown symbol ath_hal_computetxtime
418 [ 809.320553] ath_pci: disagrees about version of symbol
ath_hal_mhz2ieee
419 [ 809.320555] ath_pci: Unknown symbol ath_hal_mhz2ieee
420 [ 809.320799] ath_pci: Unknown symbol _ath_hal_detach
421 [ 809.321890] ath_pci: disagrees about version of symbol
ath_hal_init_channels
422 [ 809.321892] ath_pci: Unknown symbol ath_hal_init_channels
423 [ 809.322097] ath_pci: disagrees about version of symbol
ath_hal_getwirelessmodes
424 [ 809.322099] ath_pci: Unknown symbol ath_hal_getwirelessmodes
}}}
When I uninstall vmware everything works fine but I need virtualisation.
Please help me.
Ray
--
Ticket URL: <http://madwifi.org/ticket/1993>
madwifi.org <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Madwifi-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/madwifi-tickets
