Le 03/10/2011 00:00, Florian Hubold a écrit :
Am 02.10.2011 15:58, schrieb Thomas Lottmann:
Le 28/09/2011 13:54, Claire Robinson a écrit :
I've prepared an update candidate which fixes this regression and
additionally contains fixes for two other unrelated crashes.
As you are the one with the only affected model so far, i'd like
to ask you if you could please help validating the update candidate.
This one is it: https://bugs.mageia.org/show_bug.cgi?id=2816
Instructions for testing can be found here:
http://mageia.org/wiki/doku.php?id=qa_updates
Thank you. I am looking at this tonight.
They are quite basic instructions on the old wiki, the new improved
wiki is being worked on now.
In short, you need to be able to update from the Core Updates
Testing media which is not generally desirable so is disabled by
default. To be able to select Core Updates Testing as an update
media you need to use "expert" mode.
To do so, as root, use: drakrpm-edit-media --expert
You can then place a tick in the Updates and Enable columns for Core
Updates Testing.
You might get an error to do with a new msec/sectool at the moment
when you go to update, you can safely ignore it. Don't update with
everything from testing, just update the relevant hplip packages it
offers.
When you have updated them, remember to disable the Core Updates
Testing media.
Hope that helps!
Claire
Pong. :)
Sorry for the delay.
I installed the HPLIP and it's GUI packages from Core updates (manual
installation since the testing version of rpm was compulsory).
However, when I print the test pages from systen-config-printer or
HPLIP's interface, he still prints me a big black square. It does the
same when I print a Writer .odt document.
When I click on 'Cancel' to cancel the printing in the
system-config-printer task list, it _does not cancel_ the printing.
To do so, I have to press the 'Cancel' button on the printer make it
actually stop printing.
Here are the links to the logs :
HP-check -r -t : http://pastebin.com/QaBUKHzU
error_log and acces_log : http://pastebin.com/ZjbJsPzG
The testing packages I have installed are the following, as you have
told me :
*hplip-3.11.7-1.2.mga1.x86_64.rpm
*and
*hplip-gui-3.11.7-1.2.mga1.x86_64.rpm*
Also could you please post the output of rpm -qa | grep hplip ?
These two are not enough, hplip has dependencies on at least these:
hplip-model-data
hplip-hpijs
hplip-hpijs-ppds
I hope this helps.
Cheers,
Thomas aka Skiper.
I hope this offers you some clues.
Hello again,
As soon as I have a pause day (should be this thursday), I'll take care
of this and answer you. Hard times.
Feel free to push the packages if they fix other issues. I may consider
doing a clean install of Mageia again if this is necessary, since the
issue is really very very wierd and unique.
