Le vendredi 7 décembre 2012 20:32:04, Marja van Waes a écrit : > Please have a look here > http://docteam.mageia.nl/en/MCC/content/index.html
This is not a clean text but some ideas... http://docteam.mageia.nl/en/MCC/content/system-config-printer.html Network printer This is too light: When use HP JetDirect? ipp,? https? etc. "Find network printer" does not work at my home . If it does not work, explain what to do, such as set up an IP address for the printer, ether fixed in the printer or better in the dhcp server, attaching an IP to the MAC address of the printer. Hewlett-Packard printers A word about the multifunctions printer/scanner. The scanner is setup with the printer. Run HP device manager or run hp-setup as root in a terminal. If you buy a new HP printer which is not in the list, you can use the nearest printer reference. It generally works well but sometime, the scanner cannot works. You can have a look to http://openprinting.org , search in http://www.linuxfoundation.org/collaborate/workgroups/openprinting/database/databaseintro and help to find a solution http://docteam.mageia.nl/en/MCC/content/XFdrake.html Note: In case of problems, Vesa will work with most of graphic cards, ... If Vesa don't work, boot in single user mode and run drakx11 The mode which works in any case is the frame buffer (fbdev). It is used during the installation. Then, reboot in a graphic mode and use MCC/XFdrake to install the best driver. http://docteam.mageia.nl/en/MCC/content/scannerdrake.html HP multifunction printer/scanner are installed with the printer installer. To use the scanner with Gimp, you need the package xsane-gimp. -- Pierre Jarillon - http://pjarillon.free.fr/ Vice-président de l'ABUL : http://abul.org Microsoft est à l'informatique ce que McDonald est à la gastronomie
