-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 08/12/12 00:26, Pierre Jarillon wrote: > Le vendredi 7 décembre 2012 20:32:04, Marja van Waes a écrit : >> Please have a look here >> http://docteam.mageia.nl/en/MCC/content/index.html > > This is not a clean text but some ideas... > > http://docteam.mageia.nl/en/MCC/content/system-config-printer.html > > Network printer This is too light: When use HP JetDirect? ipp,? > https? etc. "Find network printer" does not work at my home . If it > does not work, explain what to do, such as set up an IP address for > the printer, ether fixed in the printer or better in the dhcp > server, attaching an IP to the MAC address of the printer. > > > Hewlett-Packard printers A word about the multifunctions > printer/scanner. The scanner is setup with the printer. Run HP > device manager or run hp-setup as root in a terminal. If you buy a > new HP printer which is not in the list, you can use the nearest > printer reference. It generally works well but sometime, the > scanner cannot works. You can have a look to > http://openprinting.org , search in > http://www.linuxfoundation.org/collaborate/workgroups/openprinting/database/databaseintro > > and help to find a solution > > > > http://docteam.mageia.nl/en/MCC/content/XFdrake.html > > Note: In case of problems, Vesa will work with most of graphic > cards, ... If Vesa don't work, boot in single user mode and run > drakx11 The mode which works in any case is the frame buffer > (fbdev). It is used during the installation. Then, reboot in a > graphic mode and use MCC/XFdrake to install the best driver. > > http://docteam.mageia.nl/en/MCC/content/scannerdrake.html > > HP multifunction printer/scanner are installed with the printer > installer. To use the scanner with Gimp, you need the package > xsane-gimp. > >
Thanks a lot for your help, Pierre. I started working on system-config-printer.html and we'll look at the other files, too. It might take some time though, I don't really have a lot of time today. Also, I'm not sure "Find Network Printer" /ever/ returns a result if you don't start with giving the relevant IP address. Do you happen to know? You can already see some changes in http://docteam.mageia.nl/en/MCC/content/system-config-printer.html#network but they haven't been saved permanently yet. Cheers, Marja -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJQwyBVAAoJEKWubDMI5nEBnagH/i9EAciqmcot81RQ0ZfLZca3 zTtCZJbBFQVauPMvjJTlkfNvvWywNO0uiHSVXzWZr8EwPcRV1t4lJlUbvL10tdEF mNFxze92GMU2NdpEL5PVQY7pUAtfQFWBcwbKf7nCcw9wmh4jTYypT3vivBKHrJgs 8eRtIJqTskkmF0y4YVj5m1I4ZDXirIsu70GEfG0TR8eTtWJiv1j8E1KPvAX88CoJ ICKlBCZWVs8LaIhGx/0Uma34whKY5hhXbtQTVV2eEfB55CPYDufVwY6eyQrsvo8e R3NmaGCDc125kBsRStCaeUrE527xQxwcIJ0C1Tn0hxLLLqTJsuiLTz5H/4hAN8s= =jscU -----END PGP SIGNATURE-----
