Ross Presser wrote: > Attached files don't generally make it through the mailing list. Can > you post them on a web site? >
You should be able to pull them from: ftp://ftp.compro.net/public/temp/bad.ps.bz2 ftp://ftp.compro.net/public/temp/good.ps.bz2 > Since it's a /limitcheck error, it's possible that your raster image > is too large to fit in the image buffer. Will it display at a lower > resolution? > If I'm doing it right, no. (display -resize 640x480 bad.ps) > On 6/12/07, Mark Hounschell <[EMAIL PROTECTED]> wrote: >> I'm new to this list (and postscript) and I hope this isn't the wrong >> place >> to ask. >> I am having problems viewing some home grown PS files. I am using IM and >> but I can't view them with anything else either so my problem is not with >> IM. >> >> I've read about all I can read pertaining to my situation and I'm not >> getting anywhere fast. >> >> I'm using raster data as my source and I seem to be hitting some size >> limitation ( I think). >> >> I have a file that displays as expected. When I add a single >> additional line >> of raster data >> and change the header accordingly it no longer displays and I get the >> following with the >> display command. >> >> [EMAIL PROTECTED]:/10.0/home/markh> display /tmp/lcrsp8878_4_5 >> ERROR: /limitcheck in -file- >> Operand stack: >> 792 663 1 --nostringval-- >> Execution stack: >> %interp_exit .runexec2 --nostringval-- --nostringval-- >> --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- >> --nostringval-- false 1 %stopped_push 1 3 %oparray_pop >> 1 3 >> %oparray_pop --nostringval-- 1 3 %oparray_pop 1 3 >> %oparray_pop >> .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 >> %stopped_push >> Dictionary stack: >> --dict:1142/3371(ro)(G)-- --dict:0/20(G)-- --dict:107/200(L)-- >> Current allocation mode is local >> Last OS error: 2 >> Current file position is 131252 >> ESP Ghostscript 8.15.3: Unrecoverable error, exit code 1 >> ERROR: /limitcheck in -file- >> Operand stack: >> 792 663 1 --nostringval-- >> Execution stack: >> %interp_exit .runexec2 --nostringval-- --nostringval-- >> --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- >> --nostringval-- false 1 %stopped_push 1 3 %oparray_pop >> 1 3 >> %oparray_pop --nostringval-- 1 3 %oparray_pop 1 3 >> %oparray_pop >> .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 >> %stopped_push >> Dictionary stack: >> --dict:1142/3371(ro)(G)-- --dict:0/20(G)-- --dict:107/200(L)-- >> Current allocation mode is local >> Last OS error: 2 >> Current file position is 131252 >> ESP Ghostscript 8.15.3: Unrecoverable error, exit code 1 >> display: no decode delegate for this image format `/tmp/lcrsp8878_4_5'. >> display: Postscript delegate failed `/tmp/lcrsp8878_4_5'. >> >> The files are very basic and only display a black box. I've attached a >> good >> one and the bad one. >> Again, the only difference in the raster data is a single line of data >> and >> the header info. >> If anyone could help me figure out what I am doing wrong or point me to >> somewhere else it >> might be appropriate to ask this, it would be greatly appreciated. >> >> Thanks and regards >> Mark >> >> > Thanks Mark _______________________________________________ Magick-users mailing list [email protected] http://studio.imagemagick.org/mailman/listinfo/magick-users
