At 5:23 AM -0700 4/19/07, David Southwell wrote: > 1. When logging on to admin/listname the old owner run by address is shown on > the Administrator Authentication page. > 2. Clicking on the run by address in the Administrator Authentication page > causes the old address to be passed to mail program. > 3. On the Mailing list general options page the new owners run by address is > shown. > 4 Clicking on the run by address in Mailing list general options page causes > the old address to be passed to mail program. > 5. All other pages are as 1 & 2 unless they are reloaded. Following reload > they behave as 3&4. > 6. After logout state 5 is again applicable.
Hmm. This sounds like it might be related to the kinds of problems discussed in FAQ 4.45, 4.65, and 4.71, although I may be wrong. You should at least check them out and follow the relevant links that are provided. -- Brad Knowles <[EMAIL PROTECTED]>, Consultant & Author LinkedIn Profile: <http://tinyurl.com/y8kpxu> Slides from Invited Talks: <http://tinyurl.com/tj6q4> ------------------------------------------------------ Mailman-Users mailing list [email protected] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.027.htp
