The Custom Value settings were the problem. Surprisingly though as both were set the same, so would think it would display with an equal scale. Which it was doing on the print, but it was stretching on the screen.
Thanks for your help Martin, greatly appreciated. It's a beer I owe you. (Need you to pay my flight over first though....) Cheers Neil -----Original Message----- From: Martin Higham [mailto:[EMAIL PROTECTED] Sent: 03 February 2004 10:24 To: Neil Evans Subject: RE: MI-L RE: Setting screen same as print. Hi, Not sure, but check Preferences > System Settings > Aspect Ratio Adjustment. If yours is using custom values then it may be the cause of your problem. Alternatively, check your printer driver isn't set to "fit to page". Best Regards, Martin Higham Avantra Geosystems ph (61 3) 8504 0428 0425-730-428 fx (61 3) 9596 7997 www.avantra.com.au > -----Original Message----- > From: Neil Evans [mailto:[EMAIL PROTECTED] > Sent: Tuesday, 3 February 2004 19:22 > To: [EMAIL PROTECTED] > Subject: MI-L RE: Setting screen same as print. > > > Very simple problem I'm sure, but I can't solve it. > > > > My layout on the screen looks correct, but when I print it out, it is > different. Grid lines and Boxes on the screen are actually being > stretched in one direction (x axis). How do I stop this? I've tried > "Layout, View actual size". But this doesn't seem to fix it. > > > > Any help or suggestions greatly appreciated. > > Thanks > > Neil > > > > > > > > > > --------------------------------------------------------------------- List hosting provided by Directions Magazine | www.directionsmag.com | To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Message number: 10217
