OK, I'll try that.
Many thanks, Tom
Alexandre
Kralidis,Tom [Burlington] wrote:
Right, those may or may not have MapServer WMSs with the service= required
behaviour.
That said, I can connect a WMS from my local ms4w to Google Earth without
problem.
Try this and check your web logs. See the actual request passed by GE, and
this should help you diagnose the issue.
Since you are using 5.2.0, I would not suspect it's an issue of a missing
styles= parameter.
..Tom
-----Original Message-----
From: Alexandre Dube [mailto:[EMAIL PROTECTED]
Sent: Fri 03-Oct-08 08:09
To: Kralidis,Tom [Burlington]
Cc: MAPSERVER USERS
Subject: Re: [mapserver-users] WMS in Google Earth
Hi Tom,
Thanks for your reply, but unfortunately that didn't solved the problem.
In fact, the existing WMS servers in GE, don't use "service=WMS" in any
"Link" string and they work...
However, the wms_onlineresource IS always the first part of the "Link"
string, not the actual local link you copy/paste when in the "WMS
Parameters" menu... Does this means that GE don't accept local
wms_onlineresource ? I think this could make sense...
Any ideas ?
Alexandre
Kralidis,Tom [Burlington] wrote:
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Alexandre Dube
Sent: 02 October, 2008 4:40 PM
To: MAPSERVER USERS
Subject: Re: [mapserver-users] WMS in Google Earth
Back with my local WMS on GE problem. I think it has
something to do with the wms_onlineresource in WEB METADATA.
I downloaded the gmap datas, which are already in GE as the
last WMS service available, to be able to test locally what
is already working on the internet. At first, it worked in
GE. Then, I noticed that the wms_onlineresource was set to :
"http://www2.dmsolutions.ca/cgi-bin/mswms_gmap?";
which seemed wrong to me, because my other map doesn't exist
on the internet, only locally.
So I changed it to :
"http://127.0.0.1:port/cgi-bin/mapserv?map=/my/local/path/gmap
75_wms.map&"
and then I doesn't work anymore... also tried :
"http://127.0.0.1:port/cgi-bin/mapserv?";
no result...
I must be close the the answer. I have searched a lot over
the internet but I haven't found anything yet. Any hints ?
Alexandre
Alexandre Dube wrote:
Hi list,
I'm trying to figure how to setup my own wms layer in GE. So far,
I'm able to see each layer in the "WMS Parameters", but if I select
any, I get a big red X, meaning it's not working...
If I copy the "Link" created by GE, paste it in a browser, add
"&SERVICE=WMS&BBOX=-180,-90,180,90", then I get a map. So, I don't
really know what I'm missing here. Any hint ? I use
mapserver 5.2.0
on Linux.
This might be due to the SERVICE parameter missing WMS GetMap request.
If you, once you add the layer, right click and select "Properties",
adding "&service=WMS" to the Link string, you should be able to get a
valid map image returned.
That said, I thought we lifted the service param from WMS GetMap
requests (GetMap sans service= works for me in svn trunk).
..Tom
--
Alexandre Dubé
Mapgears
www.mapgears.com
_______________________________________________
mapserver-users mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/mapserver-users
