Yes. I'm on a 64-bit Linux box and mapsde.c compiled fine against the 10.0 client libs. Problem was it didn't work until I did two things:
- Add "CFLAGS=-DSDE64" to configure call. - Fix most of warnings (all but one) that result in the above change (change long's to ms_int32), see https://github.com/mapserver/mapserver/issues/4521. I was working against 6.0 and it looks like 6.2 will require the same changes. If you're on a 32-bit OS you probably don't need to change anything. Steve -----Original Message----- From: mapserver-users-boun...@lists.osgeo.org [mailto:mapserver-users-boun...@lists.osgeo.org] On Behalf Of Alan Boudreault Sent: Wednesday, November 14, 2012 2:31 PM To: mapserver-users@lists.osgeo.org Subject: Re: [mapserver-users] SDE 10.x support... Steve, I was looking to use SDE 10 too, have you been able to get it to work? Alan On 12-11-01 03:57 PM, Lime, Steve D (DNR) wrote: > Hi all: Has anyone successfully used the SDE 10.x client libs with > MapServer 6.0+? Compiles ok but I've had no luck actually using SDE layers. > > Steve > > *StEVE LIME | *DATA & Applications MANAGER > > MN.IT Services @ MnDNR > > 651-259-5473 (w) *|* 651-297-4946 (f) *|* steve.l...@state.mn.us > <mailto:your.n...@state.mn.us> > > // <http://www.mn.gov/oet>// > > > > Information Technology for Minnesota Government *|* mn.gov/oet > <http://www.mn.gov/oet> > > > > _______________________________________________ > mapserver-users mailing list > mapserver-users@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/mapserver-users > -- Alan Boudreault http://www.mapgears.com/ _______________________________________________ mapserver-users mailing list mapserver-users@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/mapserver-users _______________________________________________ mapserver-users mailing list mapserver-users@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/mapserver-users