Hi Steve,
The problem you'll run into is that inline pixel coordinates are
absolute so they really only work with one image size. (except for the
UL corner which is always 0,0) The only solution there is to either have
1 mapfile for each image size you need. You could muck with the
coordinates at runtime possibly too.
Ideally we'd allow relative pixel coordinates some like:
FEATURE
RELATIVETO LR
POINTS -50 -50 END
END
Which would give you a point just inside the lower right-hand corner,
but alas it has not been implemented. (not a bad idea and not that hard-
I'll file a bug now).
Good idea. I see you have added this bug:
http://mapserver.gis.umn.edu/bugs/show_bug.cgi?id=1547
I would like to see the use of values that range from 0 to 1 to specify
the location. So if you wanted the middle of the image, you would use 0.5
0.5 . Perhaps the REALTIVETO could be IMGSIZE or something like that. I
have added my comment to the bug...
thanks,
daryl
--
/**
* Daryl Herzmann ([EMAIL PROTECTED])
* Program Assistant -- Iowa Environmental Mesonet
* http://mesonet.agron.iastate.edu
*/
