John, this is not implemented in uDIG as far as I know.
Check Gaia (http://www.thecarbonportal.net/), it should work there. Also check your WMS GetCapabilities response. Best regards, Bart -- Bart van den Eijnden OSGIS, Open Source GIS http://www.osgis.nl --------- Oorspronkelijk bericht -------- Van: John Cole <[EMAIL PROTECTED]> Naar: 'Bart van den Eijnden OSGIS' <[EMAIL PROTECTED]> Cc: [email protected] Onderwerp: RE: [UMN_MAPSERVER-USERS] wms groups... Datum: 04/10/06 12:27 > Bart, > I've done just that, and I can't see the groups in uDig 1.1rc4. Should > they show up? > > Thanks, > > John > > -----Original Message----- > From: Bart van den Eijnden (OSGIS) [mailto:[EMAIL PROTECTED] > Sent: Tuesday, October 03, 2006 12:37 PM > To: John Cole > Cc: [email protected] > Subject: Re: [UMN_MAPSERVER-USERS] wms groups... > > You can just use GROUP, and then use wms_group_title IIRC. > > There is also a tag called wms_layer_group (METADATA), which can create > a more than 1 level deep structure. > > Best regards, > Bart > > John Cole schreef: > > Reading the WMS howto, I saw groups mentioned in the reference section, > but > > I'm a little confused. How can I get WMS layers to act like the mapserver > > layers GROUP tag? > > > > Thanks, > > > > John > > This email and any files transmitted with it are confidential and intended > solely for the use of the individual or entity to whom they are addressed. > If you have received this email in error please notify the sender. This > message contains confidential information and is intended only for the > individual named. If you are not the named addressee you should not > disseminate, distribute or copy this e-mail. > > > > > > > > > -- > Bart van den Eijnden > OSGIS, Open Source GIS > http://www.osgis.nl > This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. > >
