/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting!
/* ALSO: Don't quote this header. It makes you look lame :-) */
Hi All,
I've finally found a Win98 FTP client that works on my Masqueraded network
.. FTP Voyager. But the throuput is painfully slow ( about 500 cps ) on an
average ..when i have a 64kbps ISDN link .( From a standalone machine on
33.6k modem PPP .. i get 1500 cps at least )
FTP Voyager allows several adjustments in connection properties : Receive
and send timeouts ( 61-600 seconds ), send / receive buffers ( 512-65536
bytes ) , Active & passive modes ...
What might help ?
i) kernel upgrade from 2.2.14 to 2.2.16 ( I run Redhat 6.2 & SuSe 6.4 )
ii) Ethernet card config ?
iii ) Any other suggestions ?
Regards
Anurag
-----From a post on a MASQ LIST ----------
>I had a couple configuration problems, with one or more of them causing the
>slowdown. First, I upgraded the kernel to 2.2.14, since www.kernel.org
>listed "MASQ bug fixes" as one of the updates. This didn't help any, so I
>continued searching. I updated several things at once, and on the next
>reboot, it all worked OK. Here's the old configuration vs new config:
>
>DLink DE-220 ISA combo card as eth0 (external interface)
> Full duplex changed to half duplex (saw it on D. Ranch's forum)
> IRQ10 remained the same
>DLink DE-220 ISA ...as eth1 (internal interface)
> Full duplex changed to half duplex
> IRQ3 changed to IRQ12 (eliminated the possible conflict with COM2 port)
>Internal newtwork addresses
> 192.168.1.x changed to 192.168.0.x - although 192.168.1.x is a valid
>class-c, I was getting some odd pings so I changed it.
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
Admin requests can be handled at http://www.indyramp.com/masq-list/ --
THIS INCLUDES UNSUBSCRIBING!
or email to [EMAIL PROTECTED]
PLEASE read the HOWTO and search the archives before posting.
You can start your search at http://www.indyramp.com/masq/
Please keep general linux/unix/pc/internet questions off the list.
