You do not say what IP addresses you are using in diald. Most of the
documentation uses 192.168.0.1 and 192.168.0.2 but this gave the same
problems you are having with route. I changed mine to 192.168.1.1 (eth0 on
my system) and 0.0.0.0.
This has cured the route problem and has given me more speed.
I can only assume that the local address (162.168.1.1) is recognised by
DNS/hosts and allows route to complete it's output. I had some problems
with loading the bsd_comp (or what ever) module which caused ipfwadm
(2.0.35 kernel) to block all connection from the machine attached to the
masq box (lagre network 8-) ).
Hope this helps.
Carrott
At 09:23 08/04/99 -0500, Fuzzy Fox wrote:
>
>Jon Etkins <[EMAIL PROTECTED]> wrote:
>>
>> Appending the -n parameter, to force it to show numeric addresses only,
>> cures the delay - as does adding 192.168.0.0 to my hosts file - so it
>> appears that it's trying to resolve 192.168.0.0 to a host name.
>
>Right.
>
>> It this working as designed? It doesn't seem right to me.
>
>How is ipfwadm supposed to know which IP addresses it "should" be able
>to look up, and which ones it shouldn't? It just tries to look up
>everything. If you don't want it to do that, use the -n switch.
>
>Adding the network name to your /etc/networks file might make a
>difference, too. Even better, if you run your own nameserver, make
>it authoritative for the 0.168.192.in-addr.arpa domain, so that you
>don't waste the internet's time with requests for private network
>addresses. :)
>
>--
> [EMAIL PROTECTED] (Fuzzy Fox) || "Nothing takes the taste out of peanut
>sometimes known as David DeSimone || butter quite like unrequited love."
> http://www.dallas.net/~fox/ || -- Charlie Brown
>
>
>_______________________________________________
>Masq maillist - [EMAIL PROTECTED]
>http://tiffany.indyramp.com/mailman/listinfo/masq
>Admin requests can be handled by web (above) or
[EMAIL PROTECTED]
>
>
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
