[EMAIL PROTECTED] wrote: > > Your problem is based on the DHCP server. > > I just ran into this problem myself. > > When you use DHCP on a client, it ignores other network settings > (actually I don't think this is quite always the case... but for the sake > of argument lets say it does) > So all those settings you defined statically need to be defined on the > DHCP server as the information to pass to the client. > > On a WinNT DHCP server you goto DHCP Options, Scope, and add the > appropreate things you need. > > Let me know if that helps. > > Josh Ok, that sounds like it makes sense, but I didn't see anything in the scope options about a gateway. Can you tell me what settings you had to add? I currently have 006-DNS Servers, 015-Domain Name, 044-WINS/NBNS Servers, and 046-WINS/NBT Node Type set. I figure I'll need to add 005-Name Servers but I don't see anything else to tell it to use my Linux box as a gateway, and when I can't even ping my internet name server I think I must need something more. Tim Fletcher wrote: > > I see the problem, this appers to be a dhcp server configuration issue, is > it a unix based one or an NT one? If its unix could I have a look at the > /etc/dhcpd.conf or if its NT could you see what the config on the server > is and post a copy of it. It is an NT server. The dhcp settings are: DNS Servers - 192.168.1.3 # The address of the NT server Domain Name - MyDomain WINS/NBNS Servers - 192.168.1.3 WINS/NBT Node Type - 0x8=H-Type Thanks, Rob Rogers _______________________________________________ Masq maillist - [EMAIL PROTECTED] http://tiffany.indyramp.com/mailman/listinfo/masq Admin requests can be handled by web (above) or [EMAIL PROTECTED]
