/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting! */
>#1 is for the firewall and the rest of
>the network and the other will go through the firewall but will hit a
>certian machine.
>
>209.xxx.xxx.1 firewall
>209.xxx.xxx.2 through firewall and machine with ip of
>209.xxx.xxx.2
>
>Is this posible?
No. The pre- and -post firewall network segments MUST be addressed
differently. Because of this, you can't do what you want. BUT.. you
can portfw traffic from the specific 209.x.x.2 address to MASQed
internal machine. This is close.
>#2. I want to be able to forward diffrent ports to a certian machine. Ive
>read many diffrent help and diffrent online documentation and use the
>trinity os type rc.firewall. the trinity os didnt help me out to much
>because they dont explain much with IP Chains. I have attached the actual
>rc.firewall file that i have compiled to run on my firewall.
Yeah.. TrinityOS isn't much on explaining things beyond the comments in
there. You might want to read the IPCHAINS howto.
Anyway, the portfw example in the IP MASQ HOWTO should get you going.
Did you read that? Make sure you are reading v1.77 or better.
>#3. I want to know if there is like a load balancing that i can do with
>IPChains. What i was thinking is splitting up the load between 2 valid ip
>addresses. The way my cable modem works from what i found out is that there
>is only so much bandwith for each ip address so you can have a maximum of
>about 2 machines wich really sucks. But i wanted to know if there is a way
>that i can put like 2 machines on one ip and 2 more on the other ip. Or
>should i just go DSL? thank you for all your help
There are work arounds for stuff like this but they are a kludge. If you
need better performance, get DSL or beg your cablemodem vendor to offer a
higher performance package. TCI@Home did this to me too and I'm pissed.
15KB/s sucks for uploads.
--David
.----------------------------------------------------------------------------.
| David A. Ranch - Linux/Networking/PC hardware [EMAIL PROTECTED] |
!---- ----!
`----- For more detailed info, see http://www.ecst.csuchico.edu/~dranch -----'
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
Admin requests can be handled at http://www.indyramp.com/masq-list/ -- THIS INCLUDES
UNSUBSCRIBING!
or email to [EMAIL PROTECTED]
PLEASE read the HOWTO and search the archives before posting.
You can start your search at http://www.indyramp.com/masq/
Please keep general linux/unix/pc/internet questions off the list.
