/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting! */
Here is my routing table, the default route is set to ppp0 when it's active.
# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
216.26.1.22 * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.254 * 255.255.255.255 UH 0 0 0 eth0
192.168.1.0 192.168.1.254 255.255.255.0 UG 0 0 0 eth0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
192.168.0.0 internal-gw.bun 255.255.255.0 UG 0 0 0 eth0
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 216.26.1.22 0.0.0.0 UG 0 0 0 ppp0
------------------------------------------------------------------------
Curt McNamee <[EMAIL PROTECTED]>
ICQ - 654042
----- Original Message -----
From: Raul Carvalho <[EMAIL PROTECTED]>
To: Curt McNamee <[EMAIL PROTECTED]>
Cc: Masq <[EMAIL PROTECTED]>
Sent: Friday, March 03, 2000 11:56 AM
Subject: Re: [Masq] Masq routing
> /* HINT: Search archives @ http://www.indyramp.com/masq/ before posting!
*/
>
>
> Hmmm.... How is your routing table? Issue /sbin/route and check if there
> is a route to ppp0 when your ppp0 is active.
>
> Raul Miguel Pinheiro de Carvalho
> ISR - Instituto de Sistemas e Robotica, Porto
> e-mail: [EMAIL PROTECTED]
>
> On Fri, 3 Mar 2000, Curt McNamee wrote:
>
> > /* HINT: Search archives @ http://www.indyramp.com/masq/ before posting!
*/
> >
> >
> > Hey all, I have two kind of stupid questions for you all. I currently
have
> > an RH 6.1 kernel 2.2.12-20 system using IPCHAINS doing my MASQ routing
to
> > the internet for my two internal nets. My linux box has eth0
> > (192.168.1.254) & eth0:0 (192.168.0.254) servicing nets 192.168.1.0 &
> > 192.168.0.0 and ppp0 (dynamic IP) connected to the internet. What I
would
> > like to do is have requests from each of the private nets to the private
> > nets hit eth0 or eth0:0 and requests to the outside would hit ppp0. I
> > understand that is how the masqing principle works. When I do a
traceroute
> > from anything on the internal nets it tells me it hits eth0 or eth0:0
but
> > never ppp0 (even when going outside), is there anyway I could get it to
show
> > it using ppp0 rather than just eth0 or eth0:0? Another question is when
I
> > check masq'd connections (netstat -M) it tells me that 192.168.1.1 is
using
> > masq to get to 192.168.1.2, is there anyway I could get 192.168.1.1 to
> > connect with 192.168.1.2 without using a masq connection? Thanks for
the
> > help!
> >
> > ------------------------------------------------------------------------
> > Curt McNamee <[EMAIL PROTECTED]>
> > ICQ - 654042
> >
> > _______________________________________________
> > Masq maillist - [EMAIL PROTECTED]
> > Admin requests can be handled at http://www.indyramp.com/masq-list/ --
THIS INCLUDES UNSUBSCRIBING!
> > or email to [EMAIL PROTECTED]
> >
> > PLEASE read the HOWTO and search the archives before posting.
> > You can start your search at http://www.indyramp.com/masq/
> > Please keep general linux/unix/pc/internet questions off the list.
>
> _______________________________________________
> Masq maillist - [EMAIL PROTECTED]
> Admin requests can be handled at http://www.indyramp.com/masq-list/ --
THIS INCLUDES UNSUBSCRIBING!
> or email to [EMAIL PROTECTED]
>
> PLEASE read the HOWTO and search the archives before posting.
> You can start your search at http://www.indyramp.com/masq/
> Please keep general linux/unix/pc/internet questions off the list.
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
Admin requests can be handled at http://www.indyramp.com/masq-list/ -- THIS INCLUDES
UNSUBSCRIBING!
or email to [EMAIL PROTECTED]
PLEASE read the HOWTO and search the archives before posting.
You can start your search at http://www.indyramp.com/masq/
Please keep general linux/unix/pc/internet questions off the list.
