Stefen Boyd <[EMAIL PROTECTED]> wrote:
>
> >To get
> >more information, start pppd with the "debug" option. Then it will show
> >you the negotiation with the remote side.
> Well, I was using "debug". I added "kdebug 7" and got the following.
"kdebug" doesn't give any useful information, in my experience.
I don't think you have "debug" turned on, because here is an example of
some debug output from pppd:
pppd[267]: Starting link
pppd[267]: Serial connection established.
pppd[267]: Connect: ppp0 <--> /dev/ttyS0
pppd[267]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x39ac2e64> <pcomp>
<accomp>]
pppd[267]: rcvd [LCP ConfRej id=0x1 <magic 0x39ac2e64>]
pppd[267]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
pppd[267]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
pppd[267]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
pppd[267]: rcvd [LCP ConfReq id=0x2 <mru 1524> <auth pap> <asyncmap 0x0>]
pppd[267]: sent [LCP ConfAck id=0x2 <mru 1524> <auth pap> <asyncmap 0x0>]
pppd[267]: sent [PAP AuthReq id=0x1 user="fox" password="PaZwUrD"]
pppd[267]: rcvd [PAP AuthNak id=0x1 ""]
pppd[267]: Remote message:
pppd[267]: PAP authentication failed
pppd[267]: rcvd [LCP TermReq id=0x3]
pppd[267]: LCP terminated by peer
pppd[267]: sent [LCP TermAck id=0x3]
pppd[267]: rcvd [LCP ConfReq id=0x4]
pppd[267]: Connection terminated.
pppd[267]: Hangup (SIGHUP)
--
[EMAIL PROTECTED] (Fuzzy Fox) || "Nothing takes the taste out of peanut
sometimes known as David DeSimone || butter quite like unrequited love."
http://www.dallas.net/~fox/ || -- Charlie Brown
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
For daily digest info, email [EMAIL PROTECTED]
