You are correct. Thank you.
Ray
On Nov 5, 2007, at 5:27 PM, Dirk Van Hertem wrote:
hello all,
I think there is a small documentation bug in version 3.2 of matpower.
In the help of "opf.m", the following is stated:
Then, to each element of r a function is applied as encoded in the
fparm matrix (see manual or type 'help generalcost'). If the
resulting vector is now named w, then H and Cw define a quadratic
cost on w: (1/2)*w'*H*w + Cw * w . H and N should be sparse
matrices
and H should also be symmetric.
In this paragraph, the reference to 'help generalcost' is incorrect
as the file generalcost.m is not in the matpower3.2 package (at
least not in my downloaded version). The explanation is in the
manual, so there is no real problem, just thought that this could be
adjusted (or adding generalcost.m or removing the 'help
generalcost') in a future version.
Best regards,
Dirk Van Hertem
--
Dirk Van Hertem [email protected]
Electrical Engineering Department http://www.esat.kuleuven.be/electa
K.U. Leuven, ESAT-ELECTA tel: +32-16-32.18.95
10, Kasteelpark Arenberg, B-3001 Heverlee fax: +32-16-32.19.85
