@Vinícius José Lindolpho Antunes, Thanks. I will be glad if you can send that to me. I will try using it.
________________________________ From: Vinícius José Lindolpho Antunes <[email protected]> To: MATPOWER discussion forum <[email protected]> Sent: Wed, October 14, 2009 7:43:43 PM Subject: Re: Harmonic voltage measurement Hey Durga, I have once used Simulink for doing such measurement. I wrote a paper and training material (did that as part of a project called "Development of a simulation methodology for power quality issues"), but is all in Portuguese (I am Brazilian). If you still think you could use that, let me know and I can try to find that for you. Regards, Vinícius José Lindolpho Antunes On Wed, Oct 14, 2009 at 9:29 PM, Durga Reddy <[email protected]> wrote: > >@ Dirk, Thank you so much. Basically am signal processing student, so bit new >to power systems. Am looking for some programming model to obtain the harmonic >voltage measurements at a particular bus for standard IEEE 14-bus system. >> >Thanks > > > > ________________________________ From: Dirk Van Hertem <[email protected]> >To: MATPOWER discussion forum <[email protected]> >Sent: Wed, October 14, 2009 7:04:27 PM >Subject: Re: Harmonic voltage measurement > >>Durga Reddy wrote: >> Hi, >> It will be great if someone could give me the procedure for >> harmonic voltage measurement at particular bus using MATPOWER. >> Thanks, >> Durga >> >I do not think you know what matpower is or what a harmonic voltage >> >measurement is. Matpower is a program for steady state analysis of >electric power systems, typically using the load flow equations or an >optimization algorithm around them. Matpower works with a single >frequency, the rated one. Matpower also is a simulation tool, not a >> >measurement tool... > >Dirk > >-- >Dirk Van Hertem [email protected] >Electrical Engineering Department http://www.esat.kuleuven.be/electa >> >K.U. Leuven, ESAT-ELECTA tel: +32-16-32.18.95 >10, Kasteelpark Arenberg, B-3001 Heverlee fax: +32-16-32.19.85 > > > >
