If you have a system that has Perl installed, you can also use the psse2matpower script in the extras sub-dir. It is largely untested, but it might be the easiest starting point.
-- Ray Zimmerman Senior Research Associate 211 Warren Hall, Cornell University, Ithaca, NY 14853 phone: (607) 255-9645 On Apr 16, 2011, at 9:01 AM, Michael Power wrote: > I did this for a smaller system by using the IEEE CDF format for an interim > file: > > 1. Since I am creating an IEEE CDF format file the bus numbers can only > be 4 digit. Renumber the buses in the PSSE case via Powerflow> Renumber > buses> By subsystem, select all buses and start, say, with bus number 1. > > 2. Now save the case in IEEE format. > > 3. Use Matpower's cdf2matp to covert the IEEE formatted file into > Matpower format. > > 4. I can't remember exactly but I think you may have to edit the IEEE > CDF file before running cdf2matp. > > I will check my notes on Monday. Hope this helps. > Michael > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Peter > Pietramala > Sent: 16 April 2011 04:55 > To: [email protected] > Subject: PSS/E Format Power Flow 5000 buses > > Could you suggest (or point me to literature) that provides guidance > in converting a 5000 bus system currently in PSS/E format? Is there an > OPF modification I need to load for this large of a system? > thank you, > > Pete. > > >
