This message (and attachments) is subject to restrictions and a disclaimer. Please refer to http://www.unisa.ac.za/disclaimer for full details. ________________________________
Thanks for the link and the example. Robin From: [email protected] [mailto:[email protected]] On Behalf Of Santiago Chamba Sent: 06 October 2011 09:35 PM To: 'MATPOWER discussion forum' Subject: RE: LMP for Reserves Hello Robin, Attached is an example (overlapping_reserves_eg.m) that demonstrates such a case and verifies the prices by perturbing each constraint. You can see how the dispatches change (and consequently how the system cost is affected) as the constraints are perturbed. This this explanation presented to me by Prof. Zimmerman. you can find all the discussion in: http://www.mail-archive.com/[email protected]/msg01356.html Att. Santiago De: [email protected] [mailto:[email protected]] En nombre de Naidoo, Robin Enviado el: jueves, 06 de octubre de 2011 9:31 Para: [email protected] Asunto: LMP for Reserves This message (and attachments) is subject to restrictions and a disclaimer. Please refer to http://www.unisa.ac.za/disclaimer for full details. ________________________________ Good Day, When performing an opf with reserves Matpower gives the LMP for reserves at the generator buses. In the case where there is no congestion, the price will be uniform at all buses. In the case where there is congestion on the network , the prices will not be the same at all the buses. I need some suggestion on how to obtain the prices at the non generator buses. Thanks Robin
