>>sir
i am getting the load variations by writing the code as below.but i want
that variations for 8hrs,4hrs,10hrs respectively and i want to set the
price at that bus high during peak periods and low during off peak
periods.i read the price sensitive loads but i am not understanding how to
apply.sir if you dont mind please explain me with the code by taking a
small 5 bus system.it is very necessary for my project work.
mpc1 = loadcase('case14o');
>> define_constants;
>> for factor = 0.5
mpc1.bus(3,PD) = factor*41.0;
mpc1.bus(3,QD) = factor*41.0;
results = runpf(mpc1);
mpc2 = loadcase('case14o');
define_constants;
for factor = 0.8
mpc2.bus(3,PD) = factor*41.0;
mpc2.bus(3,QD) = factor*41.0;
results = runpf(mpc2);
mpc3 = loadcase('case14o');
define_constants;
for factor = 1.0
mpc3.bus(3,PD) = factor*41.0;
mpc3.bus(3,QD) = factor*41.0;
results = runpf(mpc3);
end
end
end
is the above code is correct or not please check.
On Sat, Feb 20, 2016 at 1:31 AM, Ray Zimmerman <[email protected]> wrote:
> Please read the scale_load()
> <http://www.pserc.cornell.edu//matpower/docs/ref/matpower5.1/scale_load.html>
> documentation
> carefully. To scale the load at a single bus (e.g. bus 3) you need to set
> the load_zone argument to select that bus …
>
> nb = size(mpc(t).bus, 1);
> load_zone = zeros(nb, 1);
> load_zone(3) = 1;
> [mpc(t).bus, mpc(t).gen] = scale_load(0.5, mpc(t).bus, mpc(t).gen,
> load_zone);
>
> Ray
>
>
>
>
> On Feb 19, 2016, at 7:59 AM, shruti seemala <[email protected]>
> wrote:
>
> sir
> i am doing my project on demand response using time based program.
> 1.i am taking an ieee 14 bus system.
> 2.i apply demand response on one of the buses which have more demand.
> 3.for that i require peak,off peak and valley period demand and price
> under different periods.
> 4.for 8hrs,4hrs and 10hrs the load variation is 0.5*peak
> load,1*peakload,0.8*peakload respectively i assumed.
> 5.i want to select 3rd bus and assume peakload as 41MW.
> 6.i use this code for first 8hrs.
> mpc0 = loadcase('case14');
> for t = 1:8
> mpc(t) = mpc0;
> mpc(t).bus = scale_load(0.5, mpc(t).bus);
> results(t) = runpf(mpc(t));
> end
> i get some result.but i want the load to be change at third bus only as
> mentioned w.r.t peakload
> 7.for that i try this code
> mpc0 = loadcase('case14');
> >> for t = 1:8
> mpc(t) = mpc0;
> mpc(t).bus = scale_load(0.5, mpc(t).bus(4,4));
> results(t) = runpf(mpc(t));
> end
> Attempted to access bus(:,3); index out of bounds because numel(bus)=1.
>
> Error in scale_load (line 168)
> load_zone(bus(:, PD) ~= 0 | bus(:, QD) ~= 0) = 1; %% FIXED loads
> it is showing like this.
> i use mpc(t).bus(4,4) because it is the representation of 3rd bus load in
> the bus data.is it correct approach.
> 8.how can we set price for different periods.
> 9.please suggest me
>
>
>
