In order to observe high prices under peak periods, you will need to design
your generator costs so that high cost generators are needed to meet the demand
in these peak periods, but not in lower demand periods. Under those
circumstances, the prices will also be high in the peak periods, offering an
opportunity for curtailable demand to respond.
Ray
> On Feb 23, 2016, at 11:26 AM, shruti seemala <[email protected]> wrote:
>
> sir
> according to the time of use program under demand response concept,the demand
> during some peak periods is high.so i want to make the price to be higher
> under such periods and low during offpeak periods.is <http://periods.is/> it
> possible using matpower.
>
> On Tue, Feb 23, 2016 at 8:52 PM, Ray Zimmerman <[email protected]
> <mailto:[email protected]>> wrote:
> The price is not something you “set” when running an OPF. It is one of the
> outputs. If you have a range of generator costs, you should see prices rise
> as load increases. Of course, you can also vary the costs at different hours
> too. But you will need to decide precisely how you want to specify the
> problem to solve at each hour. Is it just the load that is changing?
>
> If so, and you have the load scaling factors stored in a vector factor, then
> you can do it something like this …
>
> define_constants;
> factor = [0.5; 0.8; 1.0];
> mpc0 = loadcase('case14o');
> nt = length(factor);
> nb = size(mpc0.bus, 1);
> load_zone = zeros(nb, 1);
> load_zone(3) = 1;
> for t = 1:nt
> mpc(t) = mpc0;
> [mpc(t).bus, mpc(t).gen] = ...
> scale_load(factor(t), mpc(t).bus, mpc(t).gen, load_zone);
> results(t) = runpf(mpc(t));
> end
>
> Then you can find the resulting prices for period t in results(t).bus(:,
> LAM_P).
>
> Ray’
>
>
>
>> On Feb 20, 2016, at 4:17 AM, shruti seemala <[email protected]
>> <mailto:[email protected]>> wrote:
>>
>> >>sir
>>
>> i am getting the load variations by writing the code as below.but i want
>> that variations for 8hrs,4hrs,10hrs respectively and i want to set the price
>> at that bus high during peak periods and low during off peak periods.i read
>> the price sensitive loads but i am not understanding how to apply.sir if you
>> dont mind please explain me with the code by taking a small 5 bus system.it
>> <http://system.it/> is very necessary for my project work.
>>
>>
>>
>> mpc1 = loadcase('case14o');
>>
>> >> define_constants;
>>
>> >> for factor = 0.5
>>
>> mpc1.bus(3,PD) = factor*41.0;
>>
>> mpc1.bus(3,QD) = factor*41.0;
>>
>> results = runpf(mpc1);
>>
>> mpc2 = loadcase('case14o');
>>
>> define_constants;
>>
>> for factor = 0.8
>>
>> mpc2.bus(3,PD) = factor*41.0;
>>
>> mpc2.bus(3,QD) = factor*41.0;
>>
>> results = runpf(mpc2);
>>
>> mpc3 = loadcase('case14o');
>>
>> define_constants;
>>
>> for factor = 1.0
>>
>> mpc3.bus(3,PD) = factor*41.0;
>>
>> mpc3.bus(3,QD) = factor*41.0;
>>
>> results = runpf(mpc3);
>>
>> end
>>
>> end
>>
>> end
>>
>> is the above code is correct or not please check.
>>
>>
>> On Sat, Feb 20, 2016 at 1:31 AM, Ray Zimmerman <[email protected]
>> <mailto:[email protected]>> wrote:
>> Please read the scale_load()
>> <http://www.pserc.cornell.edu//matpower/docs/ref/matpower5.1/scale_load.html>
>> documentation carefully. To scale the load at a single bus (e.g. bus 3) you
>> need to set the load_zone argument to select that bus …
>>
>> nb = size(mpc(t).bus, 1);
>> load_zone = zeros(nb, 1);
>> load_zone(3) = 1;
>> [mpc(t).bus, mpc(t).gen] = scale_load(0.5, mpc(t).bus, mpc(t).gen,
>> load_zone);
>>
>> Ray
>>
>>
>>
>>
>>> On Feb 19, 2016, at 7:59 AM, shruti seemala <[email protected]
>>> <mailto:[email protected]>> wrote:
>>>
>>> sir
>>> i am doing my project on demand response using time based program.
>>> 1.i am taking an ieee 14 bus system.
>>> 2.i apply demand response on one of the buses which have more demand.
>>> 3.for that i require peak,off peak and valley period demand and price under
>>> different periods.
>>> 4.for 8hrs,4hrs and 10hrs the load variation is 0.5*peak
>>> load,1*peakload,0.8*peakload respectively i assumed.
>>> 5.i want to select 3rd bus and assume peakload as 41MW.
>>> 6.i use this code for first 8hrs.
>>> mpc0 = loadcase('case14');
>>> for t = 1:8
>>> mpc(t) = mpc0;
>>> mpc(t).bus = scale_load(0.5, mpc(t).bus);
>>> results(t) = runpf(mpc(t));
>>> end
>>> i get some result.but i want the load to be change at third bus only as
>>> mentioned w.r.t peakload
>>> 7.for that i try this code
>>> mpc0 = loadcase('case14');
>>> >> for t = 1:8
>>> mpc(t) = mpc0;
>>> mpc(t).bus = scale_load(0.5, mpc(t).bus(4,4));
>>> results(t) = runpf(mpc(t));
>>> end
>>> Attempted to access bus(:,3); index out of bounds because numel(bus)=1.
>>>
>>> Error in scale_load (line 168)
>>> load_zone(bus(:, PD) ~= 0 | bus(:, QD) ~= 0) = 1; %% FIXED loads
>>> it is showing like this.
>>> i use mpc(t).bus(4,4) because it is the representation of 3rd bus load in
>>> the bus data.is <http://data.is/> it correct approach.
>>> 8.how can we set price for different periods.
>>> 9.please suggest me
>>
>>
>
>
