Hi Shri, Here is attached file. Last time I hyperlinked with my google drive.
bests- Mahi On Mon, Feb 27, 2017 at 8:03 PM, Abhyankar, Shrirang G. <[email protected]> wrote: > Hi Mahi, > No file was attached with your email. > > Shri > > From: Mahbubur R <[email protected]> > Reply-To: MATPOWER discussion forum <[email protected]> > Date: Monday, February 27, 2017 at 6:52 PM > To: MATPOWER discussion forum <[email protected]> > Subject: Re: CPF with Matpower > > Hi Shri, > Thanks for the very helpful response. Yes, I got it working. One problem I > am facing, is that for some cases after the running of the cpf, it is > saying "CPF TERMINATION: Corrector did not converge in 10 iterations", > suppose in the attached > <https://drive.google.com/open?id=0BzHW_Oh9YrAfY0gwQ0xTNGJHVzg>case > (modified 14 bus case, only the line impedances are changed). > > So in this case is there anyway I can increase the number of steps for the > cpf? > > Thanks > Mahi > > On Wed, Feb 22, 2017 at 11:16 AM, Abhyankar, Shrirang G. <[email protected]> > wrote: > >> Hello Mahi, >> basecasedata is a MATPOWER data struct that has the base case >> loading/generation, while targetcasedata has that for the target >> loading/generation. A continuation power flow traces power flow solutions >> starting from the base case to the target case, if it can be reached. >> >> Please see the example on Page 46 of the manual >> <http://www.pserc.cornell.edu/matpower/manual.pdf>. It has an >> illustrative example demonstrating how to run a continuation power flow.. >> >> CPF can plot the PV curve by setting the cpf.plot.level MATPOWER option. >> Additionally, you can choose specific bus(es) with the option cpf.plot.bus >> (see Table 5.2 in the manual) >> >> MATPOWER does not directly transfer the continuation power flow results >> to Excel, you can do so using the appropriate MATPOWER commands for >> exporting data. The continuation power flow results are stored in the ouput >> results struct of the continuation power flow. The description of the >> various fields of this struct are given in Table 5.1. >> >> Hope this helps. >> >> Shri >> >> From: Mahbubur R <[email protected]> >> Reply-To: MATPOWER discussion forum <[email protected]> >> Date: Tuesday, February 21, 2017 at 4:50 PM >> To: "[email protected]" <[email protected]> >> Subject: CPF with Matpower >> >> Hello, >> I apologize for a very basic question. I want to run CPF using matpower >> and finding no way to do it. In the manual it says that I need to do the >> following >> >> results = runcpf(basecasedata, targetcasedata) >> >> But, suppose I want to do CPF for the 14 bus - 'case14'. What do I need >> to do for that? Is the case14 would be the basecasedata in this case? What >> would be the targetcasedata? >> >> Once, these are solved can I transfer all P-V results to excel file in >> order to draw the PV curve? >> >> Thanks in advance. >> >> >> Bests- >> Mahi >> >> >
case14_index_70.m
Description: application/vnd.wolfram.mathematica.package
