Hello everyone, I got familiar with the distribution power flow and power flow in MATPOWER, but i want to know about the phases.?
The power flow we are doing in for single phase?? And if it is for single phase than i want to know, how power flow for three phase is solved using MATPOWER? Thanks in advance. On Thu, Mar 23, 2017 at 11:00 PM, Ray Zimmerman <[email protected]> wrote: > *First, please send your MATPOWER questions to the MATPOWER-L list at > [email protected] <[email protected]> (not to the list owner).* > > The state estimation code in MATPOWER is contributed code that is not a > supported part of the main MATPOWER functionality. So, all I can do is > point you to the included documentation and suggest you follow up with the > original author Rui Bo if you have questions. > > I would start by checking out the contents of the extras/se directory in > MATPOWER. In particular, you’ll want to have a look at the se_intro.pdf > document there that describes the code. > > Ray > > > On Mar 23, 2017, at 10:20 AM, Saeed Ahmed <[email protected]> wrote: > > Respected All, > I am doing research on the topic of "Detection of false data injection on > Power State Estimation". I have installed MATPOWER 6.0 and need guidance to > start work. After reading some literature I have build up an understanding > as follows: > > 1) State estimation in DC/Linear power network is to estimate the phase > angles by observing the measurements > 2) Voltage magnitudes are assumed 1pu > > Now starting with the simplest case of 9 buses, how can I initiate the > state estimation using MATPOWER? > > Regards > Saeed Ahmed > > >
