Ok thanks On Sun, Apr 2, 2017 at 8:05 PM, Abhyankar, Shrirang G. <[email protected]> wrote:
> MATPOWER assumes the network is balanced so only a positive sequence power > flow calculation is performed for transmission and distribution. If you’d > like to do an unbalanced distribution power flow calculation then you’ll > need to use other tools like OpenDSS or GridLab-D. > > Shri > > From: Akash Tyagi <[email protected]> > Reply-To: MATPOWER discussion forum <[email protected]> > Date: Sunday, April 2, 2017 at 2:15 AM > To: MATPOWER discussion forum <[email protected]> > Subject: Re: False Data Detection in State Estimation > > Hello everyone, > > I got familiar with the distribution power flow and power flow in > MATPOWER, but i want to know about the phases.? > > The power flow we are doing in for single phase?? > > And if it is for single phase than i want to know, how power flow for > three phase is solved using MATPOWER? > > Thanks in advance. > > On Thu, Mar 23, 2017 at 11:00 PM, Ray Zimmerman <[email protected]> wrote: > >> *First, please send your MATPOWER questions to the MATPOWER-L list at >> [email protected] <[email protected]> (not to the list owner).* >> >> The state estimation code in MATPOWER is contributed code that is not a >> supported part of the main MATPOWER functionality. So, all I can do is >> point you to the included documentation and suggest you follow up with the >> original author Rui Bo if you have questions. >> >> I would start by checking out the contents of the extras/se directory in >> MATPOWER. In particular, you’ll want to have a look at the se_intro.pdf >> document there that describes the code. >> >> Ray >> >> >> On Mar 23, 2017, at 10:20 AM, Saeed Ahmed <[email protected]> >> wrote: >> >> Respected All, >> I am doing research on the topic of "Detection of false data injection on >> Power State Estimation". I have installed MATPOWER 6.0 and need guidance to >> start work. After reading some literature I have build up an understanding >> as follows: >> >> 1) State estimation in DC/Linear power network is to estimate the phase >> angles by observing the measurements >> 2) Voltage magnitudes are assumed 1pu >> >> Now starting with the simplest case of 9 buses, how can I initiate the >> state estimation using MATPOWER? >> >> Regards >> Saeed Ahmed >> >> >> >
