Thanks alot for the insight.
*Engr. AHMAD, Abubakar Sadiq**PhD Student* *Electrical Engineering.* *Bayero University, Kano. Nigeria.* *OR* *LecturerElectrical and Electronics Engineering,* *Federal University of Technology,* *P.M.B, 65, Minna.* *Nigeria*. *+2347068043665* On Thu, May 25, 2017 at 12:39 PM, Bone, Gorazd <[email protected]> wrote: > Hi, > > I suppose your TCSC is just a reactance that you can add/subtract. > > The SSSC device is more complex because it is a voltage source. If you > want to properly model it you will have to include the regulation criteria > which, with the established method, also needs an expansion of the Jacobi > that searches for the angle and amplitude of the voltage source. The most > renowned method for the SSSC modelling is the one developped by Zhang: > http://ieeexplore.ieee.org/document/1245565/http:// > ieeexplore.ieee.org/document/1245565/ > > > As it has been found that convergence for the voltage source SSSC > modelling method is terrible a current flow method was later developped: > http://www.sciencedirect.com/science/article/pii/S0142061511001347 > http://www.sciencedirect.com/science/article/pii/S0142061511001347 > > The StatCom and other 2nd generation FACTS can use a similar approach to > the SSSC. > > Coincidentally, we are currently working on implementing a method that > models the device by altering the power loads in the input data and will > likely make it available to MatPower. We will model the SSSC device by > power injections using a Newton method. > > regards, Gorazd > ------------------------------ > *Od:* [email protected] [ > [email protected]] v imenu Ahmad Sadiq Abubakar [ > [email protected]] > *Poslano:* 25. maj 2017 13:21 > *Za:* MATPOWER discussion forum > *Zadeva:* FACTS Models in MATPOWER > > Hi all, > Can anybody advice on FACTS reprersentation in MATPOWER? > OR > How do i model FACTS (e.g. TCSC or SSSC or STATCOM) to be included in > power flow rountines (e.g. runpf, runcpf or runopf) of MATPOWER. > > Best regards. > > > > *Engr. AHMAD, Abubakar Sadiq **PhD Student* > > *Electrical Engineering. * > > *Bayero University, Kano. Nigeria. * > > *OR * > > > *Lecturer Electrical and Electronics Engineering, * > > *Federal University of Technology, * > > *P.M.B, 65, Minna. * > *Nigeria*. > *+2347068043665* >
