Hello, You can set the renewable source as an active power generation source in generator matrix use PG column to set its maximum power output as Pmax and if it can not generate reactive power then treat that bus as PQ bus by numbering it '2' in bus matrix or in other way you can use it (same generation capacity of renewable) as a negative load in bus matrix.
regards Mirish On Fri, Feb 16, 2018 at 11:25 PM, Charalambos Ioannou < [email protected]> wrote: > Sorry Sir, i didn't understand what do you mean by that "set the bus to > PQ if it is not able to provide voltage support (reactive power)." > > On 16 Feb 2018, at 22:17, Ray Zimmerman <[email protected]> wrote: > > Yes, you can put renewable generators in mpc.gen. For power flow, you need > to set PG to the desired output, with a positive sign and set the bus to PQ > if it is not able to provide voltage support (reactive power). > > Ray > > On Feb 16, 2018, at 1:55 PM, Charalambos Ioannou <[email protected]> > wrote: > > Dear friends, > > I would like to know if it is possible to represent the renewable > generators in mpc.gen section as generators?? > > Moreover i would like this only for Power Flow not in Optimal Power Flow. > > If it is doable i need to set the Pmax as the capacity of the renewable > generator as a negative sing or positive sign?? and Qmax zero because the > renewable generators do not dispatch reactive power > > Thanks in advance. > > Kind Regards > > Charalampos > > > >
