How about several loads connected to the same bus? On Thu, Mar 21, 2019 at 9:12 AM Ray Zimmerman <[email protected]> wrote:
> They are added together. > > Ray > > On Mar 20, 2019, at 9:58 PM, Jubeyer Rahman <[email protected]> wrote: > > One more question regarding this, if a particular bus simultaneously has > fixed shunt and switched shunt, whose susceptance will appear on bus data > section. > > My intuition says, out of fixed shunt and switched shunt data, the one > which will be parsed later should replace the previously parsed one. Am I > right? > > Regards, > Jubeyer > > On Mon, Mar 11, 2019 at 9:46 AM Ray Zimmerman <[email protected]> wrote: > >> In the psse2mpc() function, MATPOWER only reads the initial switched >> shunt admittance data (BINIT column) of the switched shunt data, which >> appears to be zero for all switched shunts in your file. >> >> Ray >> >> >> On Mar 9, 2019, at 12:13 PM, Jubeyer Rahman <[email protected]> wrote: >> >> Sorry, please ignore my previous question. >> >> Here, I am attaching a PSS-E raw file where it contains some susceptance >> values for switched shunt data. As per your statement, matpower should be >> able to parse those susceptance values and they should appear in the 'BUS' >> data section, under the header 'Bs'. But I don't see it doing. Do you know >> why this is happening? and how to make those susceptance data appear under >> the 'Bs' header. >> >> Regards, >> Jubeyer >> >> On Fri, Mar 1, 2019 at 10:06 AM Jubeyer Rahman <[email protected]> >> wrote: >> >>> So, does matpower consider every shunt data as fixed or switchable? >>> >>> On Tue, Feb 26, 2019 at 7:00 PM Ray Zimmerman <[email protected]> wrote: >>> >>>> Currently, MATPOWER does not yet model switched shunts explicitly, so >>>> they are combined with the fixed shunts at a bus when importing from PSS/E >>>> RAW format. >>>> >>>> Ray >>>> >>>> >>>> > On Feb 26, 2019, at 12:39 PM, Jubeyer Rahman <[email protected]> >>>> wrote: >>>> > >>>> > Hi, >>>> > >>>> > Does anyone know where does switched shunt data go, after applying >>>> psse2mpc function to a PSS-E Raw file? >>>> > >>>> > And how does matpower distinguishes between switched shunt and fixed >>>> shunt data? >>>> > >>>> > Regards, >>>> > Jubeyer >>>> >>>> >>>> >>>> <case_OD_1.raw> >> >> >> >
